GE 200D9366P004 Reversingthedoorswing Single Door Refrigerator Models only, Important Notes

Page 22

Installation Instructions

REVERSINGTHEDOORSWING (Single Door Refrigerator Models only)

IMPORTANT NOTES

When reversing the door swing:

NOTE: Door swing is not reversible on stainless steel models.

•Read the instructions all the way through before starting.

•Parts are included in the door hinge kit .

•Handle parts carefully to avoid scratching paint .

•Set screws down by their related parts to avoid using them in the wrong places.

•Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right .

•Once door swing is finalized, ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side. NOTE: A replacement logo badge is included in the hinge kit .

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy compartment.

TOOLS YOU WILL NEED

Adjustable Wrench

5/16″ Socket

Ratchet/Driver

 

Masking Tape

Thin-blade Screwdriver

Phillips Screwdriver

 

Torx T-20 Driver

 

 

 

22

1REMOVETHE REFRIGERATOR DOOR

ATape the door shut with masking tape.

BRemove the hinge cover on top of the refrigerator door by carefully prying it up with a putty knife, if necessary.

CUsing a 5/16″ socket ratchet/driver, remove the bolts securing the top hinge to the cabinet . Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.

DCarefully remove the door thimble from inside the socket . This will be used again when reinstalling the door on the other side.

Hinge Cover

Top Hinge

Door Thimble

ERemove the tape and tilt the door away from the cabinet . Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door.

FSet the door on a non-scratching surface with the inside up.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Ge.com Write the model and serial numbers here Model # Serial #Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity Ge.comAbout the controls with temperature settings About the water filter. on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeRearranging the Shelves Non-Adjustable Shelves on the Door on some modelsAbout the shelves and bins To removeAbout the crispers and pans Adjustable Humidity Crisper on some modelsFruit and Vegetable Crisper Freezer Shelves and Baskets When replacing the deep full-width basketAbout the freezer drawer. on some models Basket RemovalFreezer Shelf and Basket Non-Adjustable Shelf on Freezer DoorAbout the freezer compartment. on some models Fixed Shelf RemovalAbout the automatic icemaker. on some models Icemaker Accessory KitTo reach the icemaker power switch, pull Automatic IcemakerCleaning the Outside Care and cleaning of the refrigeratorCleaning the Inside Preparing for Vacation Behind the RefrigeratorPreparing to Move Refrigerator Lights Replacing the light bulbsFreezer Light Tools YOU MAY Need Before YOU BeginPreparation Moving the Refrigerator IndoorsClearances Connecting the Refrigerator to the House Water LineRefrigerator Location Removetop CAP cont. on some modelsPlug in the Refrigerator ContTurn on the Water Supply PUT Therefrigerator in PlaceRemove the Fresh Food Door Handle Remove the FreezerdoorhandleAttach the Fresh Food Door Handle Attach the FreezerdoorhandleSET the Controls Leveling legs have 2 purposesRemovethedrawerfront RemovethebasketRemovethedrawerfront Remove the Base GrilleReplace the Freezer Basket Attachand Securethedrawer Front TotheslidesTools YOU will Need Reversingthedoorswing Single Door Refrigerator Models onlyImportant Notes Removethe Refrigerator DoorTransfer Center Hinge Bracket Remove the Freezer DoorRemove Bottom Hinge and Leveling LEG Rehangfreezerdoor Transfer Refrigerator Doorhandle TorightRehangrefrigeratordoor Install the Logo BadgeDouble Door Refrigerator Models only Removecenterhinge Removing the Doors Double Door Refrigerator Models onlyRemovetherefrigerator Doors Removeopposite DoorReplaceopposite Door Install CenterhingeRehangrefrigeratordoors Align Double DoorsInstalling the Water Line Icemaker Models What YOU will NeedChoose the Valve Location Shut OFF the Main Water SupplyDrill the Hole for the Valve Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingBefore you call for service… Normal operating soundsConsumer Support Troubleshooting Tips See About the controlsSee Replacing the light bulbs Handle is loose Handle needs adjusting Should be positioned verticallyGE Service Protection Plus Warranty Registration Department Box Louisville, KYConsumer Product Ownership Registration Model NumberOwnership Registration Page GE and Geprofilemodels One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysWhat is not Covered Terms and ConditionsGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device

200D9366P004 specifications

The GE 200D9366P004 is a high-performance component designed for various industrial applications, particularly in power generation and distribution systems. This device is a part of General Electric’s extensive lineup of electrical components, renowned for their durability and operational efficiency.

One of the main features of the GE 200D9366P004 is its robust design capacity, built to handle significant electrical loads while maintaining stability and safety. The component is engineered to comply with rigorous industry standards, ensuring not only reliability but also longevity in harsh operational environments. This makes it suitable for a range of applications, from power plants to critical infrastructure systems.

In terms of technologies, the GE 200D9366P004 incorporates advanced electric and electronic control systems that enhance its operational capabilities. This includes state-of-the-art monitoring technologies that provide real-time data on performance metrics, allowing for prompt detection of anomalies and facilitating proactive maintenance strategies. This predictive capability is crucial in minimizing downtime and extending the lifecycle of the equipment.

The operating characteristics of the GE 200D9366P004 are particularly noteworthy. It is designed for optimal thermal performance, ensuring that heat dissipation is managed efficiently. This helps in maintaining consistent performance even under high operational loads. Additionally, the component features advanced insulating materials that contribute to its reliability and efficiency, reducing the risks associated with electrical failures.

Another notable characteristic is its modular design, which simplifies installation and maintenance processes. This modularity allows for easier upgrades and repairs, making it a flexible choice for many organizations looking to enhance their operational efficiency without extensive downtime.

Overall, the GE 200D9366P004 stands out in the industrial landscape for its combination of advanced technology, rugged reliability, and operational efficiency. Whether utilized in power generation, industrial automation, or management of critical electrical infrastructure, this component exemplifies GE’s commitment to quality and innovation in electrical solutions, making it a preferred choice for professionals aiming to achieve high-performance standards in their operations.
Top Page Image Contents