GE 200D9366P004 operating instructions Before You Throw Away Your Old, Refrigerator or Freezer

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Operating Instructions

Installation

Instructions

■This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

■Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

■Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

■Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

■Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Setting either or both controls to the Off position does not remove power to the light circuit.

■Do not refreeze frozen foods which have thawed completely.

Consumer Support Troubleshooting Tips

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Child entrapment and suffocation are not problems of Refrigerants

the past. Junked or abandoned refrigerators are still

All refrigeration products contain refrigerants,

dangerous…even if they will sit for “just a few days.”

which under federal law must be removed prior

If you are getting rid of your old refrigerator, please

to product disposal. If you are getting rid of an

follow the instructions below to help prevent

old refrigeration product, check with the company

accidents.

handling the disposal about what to do.

Before You Throw Away Your Old

 

Refrigerator or Freezer:

 

■ Take off the doors.

 

■ Leave the shelves in place so that children may not

 

easily climb inside.

 

 

USE OF EXTENSION CORDS

 

Because of potential safety hazards under certain conditions, we strongly recommend against

 

the use of an extension cord.

 

 

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States)

 

or a CSA certified (in Canada), 3-wire grounding type appliance extension cord having a grounding type plug

2

and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Ge.com Write the model and serial numbers here Model # Serial #Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity Ge.comAbout the controls with temperature settings About the water filter. on some models When to Replace the FilterInstalling the Filter Cartridge Water Filter CartridgeRearranging the Shelves Non-Adjustable Shelves on the Door on some modelsAbout the shelves and bins To removeFruit and Vegetable Crisper Adjustable Humidity Crisper on some modelsAbout the crispers and pans Freezer Shelves and Baskets When replacing the deep full-width basketAbout the freezer drawer. on some models Basket RemovalFreezer Shelf and Basket Non-Adjustable Shelf on Freezer DoorAbout the freezer compartment. on some models Fixed Shelf RemovalAbout the automatic icemaker. on some models Icemaker Accessory KitTo reach the icemaker power switch, pull Automatic IcemakerCleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside Preparing to Move Behind the RefrigeratorPreparing for Vacation Freezer Light Replacing the light bulbsRefrigerator Lights Tools YOU MAY Need Before YOU BeginPreparation Moving the Refrigerator IndoorsClearances Connecting the Refrigerator to the House Water LineRefrigerator Location Removetop CAP cont. on some modelsPlug in the Refrigerator ContTurn on the Water Supply PUT Therefrigerator in PlaceRemove the Fresh Food Door Handle Remove the FreezerdoorhandleAttach the Fresh Food Door Handle Attach the FreezerdoorhandleSET the Controls Leveling legs have 2 purposesRemovethedrawerfront RemovethebasketRemovethedrawerfront Remove the Base GrilleReplace the Freezer Basket Attachand Securethedrawer Front TotheslidesTools YOU will Need Reversingthedoorswing Single Door Refrigerator Models onlyImportant Notes Removethe Refrigerator DoorRemove Bottom Hinge and Leveling LEG Remove the Freezer DoorTransfer Center Hinge Bracket Rehangfreezerdoor Transfer Refrigerator Doorhandle TorightDouble Door Refrigerator Models only Install the Logo BadgeRehangrefrigeratordoor Removecenterhinge Removing the Doors Double Door Refrigerator Models onlyRemovetherefrigerator Doors Removeopposite DoorReplaceopposite Door Install CenterhingeRehangrefrigeratordoors Align Double DoorsInstalling the Water Line Icemaker Models What YOU will NeedDrill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Tighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingBefore you call for service… Normal operating soundsConsumer Support Troubleshooting Tips See About the controlsSee Replacing the light bulbs Handle is loose Handle needs adjusting Should be positioned verticallyGE Service Protection Plus Warranty Registration Department Box Louisville, KYConsumer Product Ownership Registration Model NumberOwnership Registration Page GE and Geprofilemodels One Year GE Will ReplaceWhat GE Will Not Cover Thirty DaysWhat is not Covered Terms and ConditionsGeneral Installation/Operation/Maintenance Requirements Performance Data SheetOperating Specifications Special NoticesWater Treatment Device

200D9366P004 specifications

The GE 200D9366P004 is a high-performance component designed for various industrial applications, particularly in power generation and distribution systems. This device is a part of General Electric’s extensive lineup of electrical components, renowned for their durability and operational efficiency.

One of the main features of the GE 200D9366P004 is its robust design capacity, built to handle significant electrical loads while maintaining stability and safety. The component is engineered to comply with rigorous industry standards, ensuring not only reliability but also longevity in harsh operational environments. This makes it suitable for a range of applications, from power plants to critical infrastructure systems.

In terms of technologies, the GE 200D9366P004 incorporates advanced electric and electronic control systems that enhance its operational capabilities. This includes state-of-the-art monitoring technologies that provide real-time data on performance metrics, allowing for prompt detection of anomalies and facilitating proactive maintenance strategies. This predictive capability is crucial in minimizing downtime and extending the lifecycle of the equipment.

The operating characteristics of the GE 200D9366P004 are particularly noteworthy. It is designed for optimal thermal performance, ensuring that heat dissipation is managed efficiently. This helps in maintaining consistent performance even under high operational loads. Additionally, the component features advanced insulating materials that contribute to its reliability and efficiency, reducing the risks associated with electrical failures.

Another notable characteristic is its modular design, which simplifies installation and maintenance processes. This modularity allows for easier upgrades and repairs, making it a flexible choice for many organizations looking to enhance their operational efficiency without extensive downtime.

Overall, the GE 200D9366P004 stands out in the industrial landscape for its combination of advanced technology, rugged reliability, and operational efficiency. Whether utilized in power generation, industrial automation, or management of critical electrical infrastructure, this component exemplifies GE’s commitment to quality and innovation in electrical solutions, making it a preferred choice for professionals aiming to achieve high-performance standards in their operations.
Top Page Image Contents