Samsung RFG29THD, RFG29PHD, RFG298HD, RFG297HD Changing the Water Filter, Water filter usage

Cooling Off Mode

Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop

floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold.

To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display fl ashes OF OF.

To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds.

CHANGING THE WATER FILTER

	To reduce risk of water damage to your
WARNING	property DO NOT use generic brands of
	water fi lters in your SAMSUNG Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water

filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.

The Filter light turns red to let you know when

it is time to change your water fi lter cartridge.

To give you time to get a new fi lter, the red

( 9 ) Ice Off

If you don’t want to make more ice, touch the Ice Off button.

The icon will light up and the Ice-Maker stops making ice.

We recommend you stop ice making if the following occur:

-There is enough ice in the ice bucket.

-You want to save water and energy.

-Water is not being supplied to the

refrigerator.

If the ice maker function is ON, and the water Line is not connected, there will be a water valve noise from the back of the unit, press the Ice Off

(Hold 3sec for child lock) button for less than 3 seconds until the Ice Off

Indicator ( ) illuminates.

light comes on just before the capacity of the
current fi lter runs out. Changing the fi lter on	(Red)
time provides you with the freshest, cleanest
water from your refrigerator.

1. Shut off the water supply. Then, turn the water fi lter ( 1 ) about 1/4 turn, counter-clockwise.

2. Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).

2

1

If you do not touch any button, the freezer and fridge temperature indicator turn off in a few seconds. If you touch any button, the display lights up again.

• To change the water fi lter more easily, shut off

the water supply valve.

• Sometimes, it is hard to disassemble the water

fi lter because impurities in the water cause it to

stick. If you are having diffi culties, grip the water

( 10 ) Filter

Water filter usage

This icon will light up when you need to change the fi lter. After you use about 300 gallons of water, the fi lter indicator lights up. (about 6 months). After you install the new water fi lter, reset the fi lter indicator by touching the Alarm/hold 3 sec for Filter Reset button.

• If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.

•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.

fi lter fi rmly and pull it hard.
• When you pull the water
fi lter, a little water can	2
leak from the opening.
This is normal. To	3
minimize the water
leaks, keep the fi lter
cartridge horizontal when you pull it.

•To prevent overfl ow, empty the water fi lter tray ( 3 ) and dry around the fi lter case ( 2 ).

3. Insert the new fi lter into the fi lter case ( 4 ).

4. Push the fi lter, and then turn it clockwise until it locks.

• If you have trouble inserting the water fi lter because of high water pressure, shut off the water supply valve.

12_ operating