Samsung RFG29THD, RFG29PHD Reattaching, Refrigerator Doors, Disassemble the Freezer Drawer

2

1

2.Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part ( 6 ) of the water line coupler.

If a red clip is on the coupler, it must be CAUTION removed before removing the tube.

	4
Red Clip	3
(1/4")

5

6

3.Pull and remove the hinge lever ( 7 ). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver (+).

Remove the upper left and right door hinges ( 9 ).

8

7

9

4.Lift the door straight up to remove.

5.Remove the screw ( 10 ) attached to the lower left

and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges ( 12 ).

12

10

11

	01
Allen wrench	SETTING
REATTACHING THE
	UP
REFRIGERATOR DOORS

To reattach the fridge doors after you have moved the fridge to its fi nal location, assemble parts in reverse order.

DISASSEMBLE THE FREEZER DRAWER

1.Take out the upper drawer by lifting it up.

2.Remove the tilting pocket

( 1 ) by pulling both support

guards ( 2 ) upward at the	1
same time.	2

3.Take out the lower basket

( 3 ) by lifting the basket up	3
from the rail system.

4.Remove 4 hex head bolts

from both sides with a socket wrench (10mm).

5.Lift up the freezer door from the rails.

setting up _07