Menus
TRACER CH532 allows the user to access 4 menus to display or adjust operation parameters:
•“Data display” menu - This menu allows the user to visualize all operation parameters:
-Water and air temperatures
-Refrigerant pressures
-Saturated refrigerant temperatures
-Compressors status
-Compressor running hours
-Number of compressors starts
-Unit operating mode
-Compressors failures counters
•“Settings” menu - This menu is password protected. It allows access to the settings of:
-Setpoints
-Offset of cooling and heating setpoints
-Unit operation validation
-Customer inputs and outputs
•“Clock” menu - This menu is password protected. It allows access to the settings of:
-Day of the week, hour, date
-Daily or weekly program
-Hourly zone program
•“Configuration” menu - This menu is password protected. It allows to adjust or change:
-Unit definition
-Compressors timers
-High pressure control
-Dead band, antifreeze and heater setpoints
-Type of sensors and transducers
-Operation protections
-Cooling mode limitations
-Defrost parameters
-Compressor alarms
Accessing the menus
From any screen displayed, press
Esc , TRACER CH532 will then display the following screen:
Data Display
Settings
Clock
Configuration
1.
or 
allow the cursor to move from line to line thus selecting one of the 4 menus.
Note: The selection is displayed in capital characters
2.Once one line is selected,
press 
to validate the choice.
3.Pressing Esc will exit the menu selection mode and return to default display.
10 |