Alto-Shaam 2020ESG, 1218ESG, 1010ESG, 1020ESG, 714ESG, 610ESG Electrical Grounding Instructions

Page 16

INSTALLATION

ELECTRICAL

MODEL

VOLTAGE

PHASE

CIRCUIT

AWG

6•10esG

110-120

1

20 A

2 WIRE

7•14esG

110-120

1

20 A

2 WIRE

10•10esG

110-120

1

20 A

2 WIRE

10•20esG

110-120

1

20 A

2 WIRE

12•18esG

110-120

1

20 A

2 WIRE

20•20esG

110-120

1

20 A

2 WIRE

 

208-240

1

 

3 WIRE

 

208-240

3

 

4 WIRE

OTHER VOLTAGES AVAILABLE:

Range 200 — 415V, 1 or 3 ph, 50 or 60 Hz

An electrical wiring diagram is located behind the control panel on the left side of the oven. This appliance must be branch circuit protected with proper ampacities, in accordance with the wiring diagram.

Wire size for the main incoming power to the unit must match the minimum size listed in the specifications applicable to the specific oven model. For supply connections, locate the wire size posted on the label located on the electrical control box cover, behind the service panel.

Before operating the oven, check all cable connections in the electrical connection area for tightness since connections can loosen during transport.

NOTE: After both water and electrical connections have been completed, operate the oven in any cooking mode for a period of 15 minutes and recheck the main power connections at the terminal block to make certain they remain tight.

380-415V:

For CE approved units: To prevent an electrical shock hazard between the appliance and other appliances or metal parts in close vicinity, an equalization-bonding stud is provided. An equalization bonding lead must be connected to this stud and the other appliances / metal parts to provide sufficient protection against potential difference. The terminal is marked

with the following symbol.

DANGER

ENSURE POWER SOURCE

MATCHES VOLTAGE IDENTIFIED

ON APPLIANCE RATING TAG.

DANGER

ELECTRICAL GROUNDING

INSTRUCTIONS:

This appliance is equipped with a three-pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

DANGER

AVERTISSEMENT: Directives pour la prise de courant électrique Cet appareil est muni d'une fiche à trios branches (prise de Courant) afin de vous proéger des chocs et doit être branché Directemet dans un receptacle adequate de prise do courant À trios branches. II ne faut pas couper ou enlever une banche De cette fiche.

D A N G E R

To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/ NFPA No. 70. In Canada, all electrical connections are to be made in accordance with CSA C22.1, Canadian Electrical Code Part 1 or local codes.

NOTE: Where local codes and CE regulatory requirements apply, appliances must be connected to an electrical circuit that is protected by an external GFCI outlet.

When required, recommended ground fault for Combitherm ovens is an appropriately sized breaker with built-in 30mA ground fault protection.

COMBITOUCH® ESG SERIES • GAS INSTALLATION MANUAL • MN-29246 • 14.

Image 16
Contents ES GAS Installation L I V E R Y P a C k I N GSafety Procedures Precautions N G E RInstallation Codes & Standards Ventilation RequirementsPositioning on site Minimum Clearance RequirementsPositioning requirements Lifting Instructions Common Specifications 610, 1010, 714 CombiGuard FI-23014Oven must be installed level Hood installation is requiredWater supply shut-off valve and back-flow preventer when 610ESG Touch1010ESG Touch 1010ESG714ESG Touch 714ESG1020ESG Touch 1020ESG1218ESG Touch 1218ESG2020ESG Touch 2020ESGElectrical Electrical Grounding InstructionsMobile Equipment Restraint Ventilation Requirements GAS Supply & Installation GAS Intake GAS Piping Must Never Be Installed to RUN Under the Burner Never USE AN Open Leak TestingGAS Exhaust Water Quality Requirements ONE SUggESTEd T e r Valve Installation On/O COMBITOUcH cHEckLIST Error cOdES E15 E51 E93 LED fl ashing sequence, with 2 fl ashes per period LED fl ashing sequence, with 3 fl ashes per periodLED fl ashing sequence, with 4 fl ashes per period LED fl ashing sequence, with 5 fl ashes per periodESI Original Equipment Limited Warranty Transportation dAMAgE ANd cLAIMS
Related manuals
Manual 33 pages 35.63 Kb

610ESG, 2020ESG, 714ESG, 1020ESG, 1010ESG specifications

Alto-Shaam is a leading manufacturer of innovative cooking equipment, renowned for its commitment to quality and efficiency. Among its impressive lineup, the 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG models stand out for their versatility and advanced technology, catering to the needs of modern kitchens.

The Alto-Shaam 1218ESG is a compact yet powerful solution designed specifically for high-volume cooking. Its key features include a unique Halo Heat technology that ensures even heat distribution, eliminating the need for fans or excessive airflow. This technology maintains the food's moisture and quality, making it ideal for holding, cooking, and reheating a variety of dishes. Additionally, the 1218ESG offers touchscreen controls, allowing for easy operation and programming, as well as a wide temperature range to accommodate various cooking requirements.

Similarly, the 1010ESG is engineered for efficiency in smaller spaces without sacrificing performance. It shares the same Halo Heat technology, paired with a space-saving design. The 1010ESG features a user-friendly interface and is equipped with programmable settings, making it easy to replicate dishes consistently. Its versatility allows it to handle everything from baked goods to meats, ensuring that culinary professionals can meet diverse menu demands.

The 1020ESG, on the other hand, expands on the capabilities of the 1010ESG while maintaining a compact profile. With a slightly larger cooking chamber, it allows for more substantial portions. Users can benefit from advanced features such as programmable recipes, which streamline operations in busy kitchens. The consistent cooking performance of the 1020ESG ensures that food retains its flavor and visual appeal, enhancing the dining experience.

For those requiring a larger capacity, the Alto-Shaam 714ESG and 2020ESG models provide exceptional solutions. The 714ESG is designed for heavy-duty use, making it suitable for larger batches and high-volume operations. It includes multiple cooking racks and robust construction, providing reliability and durability in high-pressure environments.

The 2020ESG takes it a step further with its extensive features tailored for extensive food service operations. Offering advanced technology and high capacity, it is aimed at large-scale kitchens where efficiency and consistency are paramount. All these models benefit from the patented Halo Heat technology, ensuring that each dish is cooked evenly and served at the perfect temperature.

In summary, the Alto-Shaam 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG represent a perfect blend of technology, reliability, and versatility. They cater to a wide range of culinary needs while ensuring the quality and consistency that food service professionals demand. With their user-friendly interfaces and innovative cooking solutions, these models continue to set the standard in the commercial cooking equipment industry.