Leak Testing, Never USE AN Open, GAS Exhaust

INSTALLATION

GAS SUPPLY & INSTALLATION

LEAK TESTING

If a pressure leak test above 1/ 2 psi is to be performed on the building supply gas piping, the shut-off gas valve and oven inlet gas supply line must be disconnected from the building supply piping before conducting the pressure test. Failure to do so may result in damage to the manual gas valve, gas components in the oven, or both.

If any gas leak tests are to be conducted at pressures equal to or below 1/ 2 psi, the manual gas shut-off valve upstream of the oven must be turned off before conducting the tests.

Leak testing of the internal oven piping system was conducted before shipping the oven from the factory. If additional testing is needed, it should only be conducted at normal gas supply pressures. If the testing is performed using combustible gas in the piping, the leak checking should be done with a soap solution (bubble checking).

The use of an electronic combustible gas leak detector is helpful, however, this type of detector can be oversensitive. Electronic detectors may indicate false leaks from other sources which would not be detected when checking with a liquid solution to verify a no-hazard gas connection.

When starting the oven after initial installation, the gas lines must be free of air. It may take up to 30 minutes to eliminate all air from the lines.

If, after this time there is no pilot, call for factory assistance.

DANGER

NEVER USE AN OPEN

FLAME TO LEAk TEST.

GAS EXHAUST

The oven is not designed for direct connection to a chimney vent system or for direct connection to a horizontal exhaust system.

The oven must be installed under a ventilation hood listed to ANSI/UL 705 (latest edition), and the installation must be completed in accordance with the ANSI/NFPA 96-1987, Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations.

Oven operators should be instructed with regard to the hazards of placing any material on top of the

oven that would obstruct the flow of flue products out the opening of the flue diverter. Operators should also be instructed with regard to the hazards of hot flue gases and that any material or items placed on top of, or in front of the flue defector could be damaged or cause a fire hazard.

DANGER

BEFORE STARTING THE APPLIANCE, MAkE CERTAIN YOU DO NOT DETECT THE ODOR OF GAS.

IF THE ODOR OF GAS IS DETECTED:

•DO NOT attempt to light any appliance.

•DO NOT touch any electrical switches.

•Extinguish any open ﬂame.

•Use a telephone OUTSIDE THE PROPERTY & IMMEDIATELY contact your gas supplier.

•If unable to contact your gas supplier, contact the ﬁre department.

COMBITOUCH® ESG SERIES • GAS INSTALLATION MANUAL • MN-29246 • 20.

610ESG, 2020ESG, 714ESG, 1020ESG, 1010ESG specifications

Alto-Shaam is a leading manufacturer of innovative cooking equipment, renowned for its commitment to quality and efficiency. Among its impressive lineup, the 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG models stand out for their versatility and advanced technology, catering to the needs of modern kitchens.

The Alto-Shaam 1218ESG is a compact yet powerful solution designed specifically for high-volume cooking. Its key features include a unique Halo Heat technology that ensures even heat distribution, eliminating the need for fans or excessive airflow. This technology maintains the food's moisture and quality, making it ideal for holding, cooking, and reheating a variety of dishes. Additionally, the 1218ESG offers touchscreen controls, allowing for easy operation and programming, as well as a wide temperature range to accommodate various cooking requirements.

Similarly, the 1010ESG is engineered for efficiency in smaller spaces without sacrificing performance. It shares the same Halo Heat technology, paired with a space-saving design. The 1010ESG features a user-friendly interface and is equipped with programmable settings, making it easy to replicate dishes consistently. Its versatility allows it to handle everything from baked goods to meats, ensuring that culinary professionals can meet diverse menu demands.

The 1020ESG, on the other hand, expands on the capabilities of the 1010ESG while maintaining a compact profile. With a slightly larger cooking chamber, it allows for more substantial portions. Users can benefit from advanced features such as programmable recipes, which streamline operations in busy kitchens. The consistent cooking performance of the 1020ESG ensures that food retains its flavor and visual appeal, enhancing the dining experience.

For those requiring a larger capacity, the Alto-Shaam 714ESG and 2020ESG models provide exceptional solutions. The 714ESG is designed for heavy-duty use, making it suitable for larger batches and high-volume operations. It includes multiple cooking racks and robust construction, providing reliability and durability in high-pressure environments.

The 2020ESG takes it a step further with its extensive features tailored for extensive food service operations. Offering advanced technology and high capacity, it is aimed at large-scale kitchens where efficiency and consistency are paramount. All these models benefit from the patented Halo Heat technology, ensuring that each dish is cooked evenly and served at the perfect temperature.

In summary, the Alto-Shaam 1218ESG, 1010ESG, 1020ESG, 714ESG, and 2020ESG represent a perfect blend of technology, reliability, and versatility. They cater to a wide range of culinary needs while ensuring the quality and consistency that food service professionals demand. With their user-friendly interfaces and innovative cooking solutions, these models continue to set the standard in the commercial cooking equipment industry.