Alto-Shaam 4.10ESiVH, 4.10esi manual Positioning on site, Minimum Clearance Requirements

Page 6

i n s t a l l a t i o n

site INSTALLATION

c a u t i o n

THE APPLIANCE MUST REMAIN ON

THE PALLET WHILE BEING MOVED

TO THE INSTALLATION SITE BY FORK

LIFT OR PALLET LIFT TRUCK.

NOTE: Note dimensions required for doorways and aisles for access of the oven and pallet to the installation site. Transport the oven in an upright and level position only. Do not tilt the oven.

NOTE: To avoid equipment damage, observe attention label on oven for area to avoid with lifting fork.

Positioning on site

Stand the oven in a level position. Use the adjustable feet to overcome an uneven floor and ensure that the unit is level.

It is strongly recommended that table top models be mounted on a factory supplied stand or a stand that is stable, open, and level. Recommended height is 32-inches (813mm). Air supply vents are located at the bottom of the oven and must not be blocked when mounted on a stand.

To insure proper operation, the installation of this oven must be completed by qualified technicians in accordance with the instructions provided in this manual. Failure to follow the instructions provided may result in damage to the oven, building, or cause personal injury to personnel.

danger

DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

c a u t i o n

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.

MINIMUM CLEARANCE REQUIREMENTS

left side

4" (152mm) minimum

 

18" (457mm) service access recommended

 

20" (508mm) from heat producing equipment

right side

4" (102mm)

back

4" (102mm) for plumbing

bottom

4" (102mm) for air movement

top

20" (508mm) for air movement

NOTE: Additional clearance is needed for service access. A minimum distance of 18-inches is strongly recommended. If adequate service clearance is not provided, it will be necessary to disconnect the water and drain to move the oven with a fork lift for service access. Charges in connection with inadequate service access is not covered under warranty.

CT Express INSTALLATION MANUAL • 4..

Image 6
Contents CT Express Warranty L i v e r y P a c k i n gSafety procedures and precautions N g e rVentilation requirements Site InstallationInstallation codes & Standards Sound pressure measurementPositioning on site Minimum Clearance RequirementsLifting Instructions Stand Installation Positioning requirementsAccessories Combitherm Cleaning Liquid CE-24750410esi 410esiVH Hard wired models Electrical connectionTop/Back of unit Obile equipment restraint Risk of electric shockAppliance must be secured To building structure Water quality requirement Use a drinking quality, cold water supply onlyOne suggested Method of installation Water connectionsInstallation Optional hand held spray hoseWater Valve Water drainageOperation Indicator LightVentless hood model Filter door latchFilter switch Top exhaust ventFilter track CT Express checklist ClearancesControlerror codesERROR Codes Press the Start Icon to Acknowledge the ErrorConterrorolcodesERROR Codes E15E51 E93 Error codes Original equipment limited warranty TRansportation damage and claims
Related manuals
Manual 58 pages 27.58 Kb

4.10esi, 4.10ESiVH specifications

The Alto-Shaam CombiOven series, including models 4.10ESiVH, 4.10ESi, and 4.10CCi, is a revolutionary line of cooking equipment designed to enhance versatility and efficiency in commercial kitchens. These combi ovens are engineered for advanced cooking techniques, combining steam and convection heat, allowing chefs to achieve precise cooking results while conserving energy and promoting food quality.

One of the main features of the Alto-Shaam CombiOven is its FlexiRack system, which optimizes space and provides flexibility. This system allows for the seamless configuration of cooking trays, making it easy to adjust cooking capacity based on specific needs. The ovens also come with removable, dishwasher-safe racks that simplify cleaning and maintenance, further enhancing operational efficiency.

The 4.10ESiVH model features Alto-Shaam's exclusive Halo Heat technology, which creates a gentle, even heat distribution throughout the cooking chamber. This technology not only enhances cooking performance but also preserves food moisture and texture, resulting in superior finished dishes. Additionally, the models are equipped with a state-of-the-art touchscreen interface that streamlines the cooking process. Customized cooking programs can be set, and real-time monitoring ensures consistent results across different culinary applications.

Another notable characteristic of the Alto-Shaam CombiOven series is its energy-efficient design. These ovens consume less energy compared to traditional cooking methods, aligning with sustainability goals in modern kitchens. The built-in water filtration system ensures the steam produced is of high quality, reducing scale buildup and extending the lifespan of the equipment.

Furthermore, the 4.10CCi model includes advanced features such as a core temperature probe and multiple cooking modes, including steam, convection, and combination cooking. This level of versatility allows chefs to prepare diverse dishes, from moist baked goods to perfectly roasted meats. The compact design of the ovens also makes them suitable for operations with limited space, without compromising on performance or capacity.

In summary, the Alto-Shaam CombiOven series, particularly the 4.10ESiVH, 4.10ESi, and 4.10CCi models, stand out in the market for their innovative technology, user-friendly functionality, and energy-efficient performance. These ovens empower chefs to create restaurant-quality meals with ease, making them an invaluable asset for any professional kitchen.