Alto-Shaam 4.10ESiVH, 4.10esi manual Positioning requirements, Stand Installation

Page 8

i n s t a l l a t i o n

site INSTALLATION

positioning requirements

qIn order to ensure proper ventilation, a minimum distance of at least 4-inches (101mm) must be kept from the sides of the oven and any adjoining surfaces.

NOTE: Additional clearance is needed for service access. A minimum distance of 18-inches is strongly recommended. If adequate service clearance is not provided, it will be necessary to disconnect the water, and drain to move the oven with a fork lift for service access. Charges in connection with inadequate service access is not covered under warranty.

 

4"

 

(102mm)

18"

 

(46cm)

EXHAUST VENT

 

4" (102mm)

qAllow a minimum of 4-inches (102mm) from the right side of the oven to allow the door to open to at least a 90° angle. Fully opened, the door will extend up to a 225° angle.

qAllow a minimum clearance of 4-inches (102mm) from the back of the oven for plumbing connections.

qAllow a 20-inch (500mm) clearance at the top of the oven for free air movement and for the steam vent(s) located at the top.

q Do not install the oven adjacent to heat producing equipment such as fryers, broilers, etc. Heat from such appliances may cause damage to the controls of the Combitherm. Minimum clearance recommended:

20-inches (500mm)

Place the Combitherm oven on a stable, non-combustible level horizontal surface. For countertop models, the oven stand must be level. Level from front-to-back and side-to-side by means of the adjustable legs. In addition, the overall height of the oven

should be positioned so the operating controls and shelves may be conveniently reached from the front.

Stand Installation

When placing the CT Express on a factory supplied oven stand, remove the oven legs, attach oven to stand with 4 M-12 bolts with lockwasher. The leg stand has adjustable legs for leveling purposes. Stand legs must be bolted to the floor. Air supply vents are located at the bottom of the oven and must not be blocked when mounted on a stand.

MINIMUM 20"

(50cm)

20"

(50cm)

CT Express INSTALLATION MANUAL • 6..

Image 8
Contents CT Express Warranty L i v e r y P a c k i n gSafety procedures and precautions N g e rSite Installation Installation codes & StandardsVentilation requirements Sound pressure measurementPositioning on site Minimum Clearance RequirementsLifting Instructions Stand Installation Positioning requirementsAccessories Combitherm Cleaning Liquid CE-24750410esi 410esiVH Hard wired models Electrical connectionTop/Back of unit Appliance must be secured To building structure Obile equipment restraintRisk of electric shock Water quality requirement Use a drinking quality, cold water supply onlyOne suggested Method of installation Water connectionsInstallation Optional hand held spray hoseWater Valve Water drainageIndicator Light Ventless hood modelOperation Filter door latchFilter track Filter switchTop exhaust vent CT Express checklist ClearancesControlerror codesERROR Codes Press the Start Icon to Acknowledge the ErrorConterrorolcodesERROR Codes E15E51 E93 Error codes Original equipment limited warranty TRansportation damage and claims
Related manuals
Manual 58 pages 27.58 Kb

4.10esi, 4.10ESiVH specifications

The Alto-Shaam CombiOven series, including models 4.10ESiVH, 4.10ESi, and 4.10CCi, is a revolutionary line of cooking equipment designed to enhance versatility and efficiency in commercial kitchens. These combi ovens are engineered for advanced cooking techniques, combining steam and convection heat, allowing chefs to achieve precise cooking results while conserving energy and promoting food quality.

One of the main features of the Alto-Shaam CombiOven is its FlexiRack system, which optimizes space and provides flexibility. This system allows for the seamless configuration of cooking trays, making it easy to adjust cooking capacity based on specific needs. The ovens also come with removable, dishwasher-safe racks that simplify cleaning and maintenance, further enhancing operational efficiency.

The 4.10ESiVH model features Alto-Shaam's exclusive Halo Heat technology, which creates a gentle, even heat distribution throughout the cooking chamber. This technology not only enhances cooking performance but also preserves food moisture and texture, resulting in superior finished dishes. Additionally, the models are equipped with a state-of-the-art touchscreen interface that streamlines the cooking process. Customized cooking programs can be set, and real-time monitoring ensures consistent results across different culinary applications.

Another notable characteristic of the Alto-Shaam CombiOven series is its energy-efficient design. These ovens consume less energy compared to traditional cooking methods, aligning with sustainability goals in modern kitchens. The built-in water filtration system ensures the steam produced is of high quality, reducing scale buildup and extending the lifespan of the equipment.

Furthermore, the 4.10CCi model includes advanced features such as a core temperature probe and multiple cooking modes, including steam, convection, and combination cooking. This level of versatility allows chefs to prepare diverse dishes, from moist baked goods to perfectly roasted meats. The compact design of the ovens also makes them suitable for operations with limited space, without compromising on performance or capacity.

In summary, the Alto-Shaam CombiOven series, particularly the 4.10ESiVH, 4.10ESi, and 4.10CCi models, stand out in the market for their innovative technology, user-friendly functionality, and energy-efficient performance. These ovens empower chefs to create restaurant-quality meals with ease, making them an invaluable asset for any professional kitchen.