Alto-Shaam 4.10esi Site Installation, Installation codes & Standards, Ventilation requirements

Page 5

i n s t a l l a t i o n

site INSTALLATION

d a n g e r

IMPROPER INSTALLATION,

ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY, DEATH, OR CAUSE PROPERTY DAMAGE.

READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

d a n g e r

AVERTISSEMENT : UNE INSTALLATION, UN AJUSTEMENT, UNE ALTÉRATION, UN SERVICE OU UN ENTRETIEN NON CONFORME AUX NORMES PEUT CAUSER DES DOMMAGES À LA PROPRIÉTÉ, DES BLESSURES OU LA MORT.

LIRE ATTENTIVEMENT LES DIRECTIVES D’OPÉRATION ET D’ENTRETIEN AVANT DE FAIRE L’INSTALLATION, OU L’ENTRETIEN DE CET ÉQUIPEMENT.

installation codes & Standards

The following codes and standards are required for installation of this oven: air supply, electrical connections, water connections, and waste water discharge.

NOTE:

Where automatically operated appliances are vented through a ventilating hood or exhaust system equipped with a damper or with a power means of exhaust, provisions shall be made to allow the equipment to operate only when the damper is open to a position to properly vent the appliance and when the power means of exhaust is in operation.

in accordance with NFPA 54 commonwealth of massachusetts only.

ventilation requirements

A steam ventilation hood is mandatory for the operation of the oven. The ventilation hood must be installed in accordance with local building codes for the steam exhaust and must protrude 12-inches to 20-inches (300 to 500mm) over the front side of the oven. A grease filter must be located in the protruding area of the hood. Grease filters should be thoroughly cleaned on a regular basis following manufacturer's instruction. Ventilation hoods must ensure an adequate amount of incoming air during operation and must be operated whenever the combination oven/steamer is used in order to avoid the accumulation of condensation in the hood area.

sound pressure measurement

 

Sound Pressure Level dBA

 

 

 

Microphone Position

With Hood

Without

 

System

Hood System

 

Operating

Operating

 

 

 

Front

70

59

 

 

 

Right Side

69

58

 

 

 

Left Side

70

60

 

 

 

Rear

69

60

 

 

 

CT Express INSTALLATION MANUAL • 3..

Image 5
Contents CT Express Warranty P a c k i n g L i v e r yN g e r Safety procedures and precautionsInstallation codes & Standards Site InstallationVentilation requirements Sound pressure measurementMinimum Clearance Requirements Positioning on siteLifting Instructions Positioning requirements Stand InstallationCombitherm Cleaning Liquid CE-24750 Accessories410esi 410esiVH Electrical connection Hard wired modelsTop/Back of unit Appliance must be secured To building structure Obile equipment restraintRisk of electric shock Use a drinking quality, cold water supply only Water quality requirementWater connections One suggested Method of installationOptional hand held spray hose InstallationWater drainage Water ValveVentless hood model Indicator LightOperation Filter door latchFilter track Filter switchTop exhaust vent Clearances CT Express checklistPress the Start Icon to Acknowledge the Error Controlerror codesERROR CodesE15 ConterrorolcodesERROR CodesE51 E93 Error codes Original equipment limited warranty TRansportation damage and claims
Related manuals
Manual 58 pages 27.58 Kb

4.10esi, 4.10ESiVH specifications

The Alto-Shaam CombiOven series, including models 4.10ESiVH, 4.10ESi, and 4.10CCi, is a revolutionary line of cooking equipment designed to enhance versatility and efficiency in commercial kitchens. These combi ovens are engineered for advanced cooking techniques, combining steam and convection heat, allowing chefs to achieve precise cooking results while conserving energy and promoting food quality.

One of the main features of the Alto-Shaam CombiOven is its FlexiRack system, which optimizes space and provides flexibility. This system allows for the seamless configuration of cooking trays, making it easy to adjust cooking capacity based on specific needs. The ovens also come with removable, dishwasher-safe racks that simplify cleaning and maintenance, further enhancing operational efficiency.

The 4.10ESiVH model features Alto-Shaam's exclusive Halo Heat technology, which creates a gentle, even heat distribution throughout the cooking chamber. This technology not only enhances cooking performance but also preserves food moisture and texture, resulting in superior finished dishes. Additionally, the models are equipped with a state-of-the-art touchscreen interface that streamlines the cooking process. Customized cooking programs can be set, and real-time monitoring ensures consistent results across different culinary applications.

Another notable characteristic of the Alto-Shaam CombiOven series is its energy-efficient design. These ovens consume less energy compared to traditional cooking methods, aligning with sustainability goals in modern kitchens. The built-in water filtration system ensures the steam produced is of high quality, reducing scale buildup and extending the lifespan of the equipment.

Furthermore, the 4.10CCi model includes advanced features such as a core temperature probe and multiple cooking modes, including steam, convection, and combination cooking. This level of versatility allows chefs to prepare diverse dishes, from moist baked goods to perfectly roasted meats. The compact design of the ovens also makes them suitable for operations with limited space, without compromising on performance or capacity.

In summary, the Alto-Shaam CombiOven series, particularly the 4.10ESiVH, 4.10ESi, and 4.10CCi models, stand out in the market for their innovative technology, user-friendly functionality, and energy-efficient performance. These ovens empower chefs to create restaurant-quality meals with ease, making them an invaluable asset for any professional kitchen.