Alto-Shaam 4.10ESiVH, 4.10esi manual Water connections, One suggested Method of installation

Page 16

i n s t a l l a t i o n

water connections

water requirements

one (1) cold water inlet - drinking quality

one (1) treated water inlet:

3/4" g

line pressure:

30 to 90 psi

 

2.8 to 6.2 bar

REFER TO PUBLISHED SPECIFIC WATER REQUIREMENTS

water drain: 1-1/2" connection with air gap

Flush the water line at the installation site.

install water intake filters (provided) [see Figure 1] before connecting the oven to the water supply.

Backflow Prevention — The equipment must be installed with adequate backflow protection to comply with applicable federal, state, and local codes.

PiPe sealing taPe (teFlon®) must be used at all connection Points. The use of a pipe sealing compound is not recommended.

Figure 1

Install water intake filter

WATER INLET

3/4" G

HAND SPRAYER VALVE REQUIRES ADDITIONAL WATER SUPPLY

1-1/2" DRAIN

TANK CLEAN-OUT

one suggested

method of installation

Water Filter

note:

unions or FleXible lines should be used to allow For oven movement when being serviced or cleaning

is needed.

reFer to Figure 1 above For ProPer intaKe locations.

Incoming cold water connection to filter or treatment system

Treated cold water

to backflow preventer to treated connection on oven

alto-shaam now offers an improved water filtration

system for combitherm®. The combiguard™ triple-guard water filtration system filters dirt, sediment, and other debris as small as 1/2 micron. This system also significantly reduces chlorine content to protect against corrosive chorine compounds. combiguard improves equipment efficiency, reduces service requirements and extends the life of the combi oven. after installation, confirm that water quality standards specified in this manual are being met. Filtration systems include one filter cartridge. additional cartridges can be purchased separately. refer to page 7 for additional ordering information.

The combiguard™ Bws Blended water system utilizes reverse osmosis to remove more than 97% of the total dissolved solids from water which can be precisely blended with filtered and treated water.

CombiGuard™ FI-23014 shown

CT Express INSTALLATION MANUAL • 14..

Image 16
Contents CT Express Warranty L i v e r y P a c k i n gSafety procedures and precautions N g e rSite Installation Installation codes & StandardsVentilation requirements Sound pressure measurementPositioning on site Minimum Clearance RequirementsLifting Instructions Stand Installation Positioning requirementsAccessories Combitherm Cleaning Liquid CE-24750410esi 410esiVH Hard wired models Electrical connectionTop/Back of unit Risk of electric shock Obile equipment restraintAppliance must be secured To building structure Water quality requirement Use a drinking quality, cold water supply onlyOne suggested Method of installation Water connectionsInstallation Optional hand held spray hoseWater Valve Water drainageIndicator Light Ventless hood modelOperation Filter door latchTop exhaust vent Filter switchFilter track CT Express checklist ClearancesControlerror codesERROR Codes Press the Start Icon to Acknowledge the ErrorConterrorolcodesERROR Codes E15E51 E93 Error codes Original equipment limited warranty TRansportation damage and claims
Related manuals
Manual 58 pages 27.58 Kb

4.10esi, 4.10ESiVH specifications

The Alto-Shaam CombiOven series, including models 4.10ESiVH, 4.10ESi, and 4.10CCi, is a revolutionary line of cooking equipment designed to enhance versatility and efficiency in commercial kitchens. These combi ovens are engineered for advanced cooking techniques, combining steam and convection heat, allowing chefs to achieve precise cooking results while conserving energy and promoting food quality.

One of the main features of the Alto-Shaam CombiOven is its FlexiRack system, which optimizes space and provides flexibility. This system allows for the seamless configuration of cooking trays, making it easy to adjust cooking capacity based on specific needs. The ovens also come with removable, dishwasher-safe racks that simplify cleaning and maintenance, further enhancing operational efficiency.

The 4.10ESiVH model features Alto-Shaam's exclusive Halo Heat technology, which creates a gentle, even heat distribution throughout the cooking chamber. This technology not only enhances cooking performance but also preserves food moisture and texture, resulting in superior finished dishes. Additionally, the models are equipped with a state-of-the-art touchscreen interface that streamlines the cooking process. Customized cooking programs can be set, and real-time monitoring ensures consistent results across different culinary applications.

Another notable characteristic of the Alto-Shaam CombiOven series is its energy-efficient design. These ovens consume less energy compared to traditional cooking methods, aligning with sustainability goals in modern kitchens. The built-in water filtration system ensures the steam produced is of high quality, reducing scale buildup and extending the lifespan of the equipment.

Furthermore, the 4.10CCi model includes advanced features such as a core temperature probe and multiple cooking modes, including steam, convection, and combination cooking. This level of versatility allows chefs to prepare diverse dishes, from moist baked goods to perfectly roasted meats. The compact design of the ovens also makes them suitable for operations with limited space, without compromising on performance or capacity.

In summary, the Alto-Shaam CombiOven series, particularly the 4.10ESiVH, 4.10ESi, and 4.10CCi models, stand out in the market for their innovative technology, user-friendly functionality, and energy-efficient performance. These ovens empower chefs to create restaurant-quality meals with ease, making them an invaluable asset for any professional kitchen.