I NST ALLATIO N
DAN GER
IMPROPER INSTALLATION,
ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY,DEATH OR CAUSE PROPERTY DAMAGE.
READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
CAUTION
TO PREVENT PERSONAL INJURY,
USE CAUTIONWHEN MOVING OR
LEVELING THIS APPLIANCE.
CA U TI O N
METAL PARTS OF THIS EQUIPMENT BECOME EXTREMELY HOTWHEN IN OPERATION. TO AVOID BURNS, ALWAYS USE HAND PROTECTION WHEN OPERATINGTHIS APPLIANCE.
D ANG ER
DO NOT store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
SIT E INST AL L ATIO N
The
ven tilati on, prop er cleaning, and mainte nance access.
1.The ove n must be insta lle d on a stabl e and leve l surfac e.
2.DO NOT install this app lia nce in any area where it may be affected by any adv erse con dition s such as steam , grease, drippi ng wat er, high tempe rat ures , or any othe r severely adver se cond itio ns.
3.DO NOT store or use any flammab le liquid s or allow flammable vapors in the vicinity of this oven or any oth er appli ance.
4.This applian ce must be kept free and cle ar of any com bustible materia ls.
5.This applianc e must be kept free and clear of any obst ruction s blocking access for mainte nanc e or servic e.
Emissions testi ng con ducted by Unde rwriter s | ||
Labor atori es, Inc.® was found to be in | ||
com pliance with the applicable requiremen ts of | ||
NFPA96: 2004 Edi tion, Par. 4.1.1.2. U.L | ||
emissions sampling of grease laden vapor | ||
resul ted in a tota l of 0.55 milligrams per cubic | ||
meter with no visible smoke and is con sidered | ||
represe nta tive of all oven mod els in the line. | ||
Based on these resul ts, hood installation and/or | ||
outsi de venting shou ld not be a requirement in | ||
most areas. Veri fy loca l cod es for location s | ||
where more restri ctive codes | are applicable. | |
| ||
MINIMUM CLEARANCE REQUIREMENTS | ||
| 3" (76 mm) | |
BACK |
| |
LEFT SIDE |
| 1" (25 mm) |
RIG HT SIDE |
| 1" (25 mm) |
TOP |
| 2" (51 mm) |
NO TE
If the applia nce has bee n unplug ged for an extende d period of time, the Real Time Clock may require recharging. For a full rech arge, plug the unit into the prope r rec epta cle for a minimum of 24 hours .
500