Denon AVR-3801 manual Setting the Subwoofer mode, Assignment of low frequency signal range

Page 21

2

ENTER

SHIFT

Enter the setting.

When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the set switches to the subwoofer mode.

Speaker type setting when using both surround speakers A and B

If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.

Setting the Subwoofer mode

1

Select the Subwoofer mode.

 

 

TUNING

BAND

MODE

 

TUNING

2

ENTER

SHIFT

Enter the setting.

The System Setup Menu reappears.

NOTES:

— Assignment of low frequency signal range —

•The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to “SMALL” in the setup menu. The low frequency signal range of channels set to “LARGE” are produced from those channels.

— Subwoofer mode —

•The subwoofer mode setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer in the “Speaker Configuration” settings (see page 18).

•When the “LFE+MAIN” playback mode is selected, the low frequency signal range of channels set to “LARGE” are produced simultaneously from those channels and the subwoofer channel.

In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range.

•Selection of the “LFE ” play mode will play the low frequency signal range of the channel selected with “LARGE” from that channel only. Therefore, the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE (only during Dolby Digital or DTS signal playback) and the channel specified as “SMALL” in the setup menu.

•Select the play mode that provides bass reproduction with body.

•When the subwoofer is set to “Yes”, bass sound is output from the subwoofer regardless of the subwoofer mode setting in surround modes other than Dolby/DTS.

Setting the DTS-ES/6.1 Source Auto

Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes.

1

ENTER

TUNING

SHIFT

At the System Setup Menu select “DTS-ES/6.1 Source Auto” and press the ENTER button.

BANDMODE

TUNING

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents AVR-3801 Page Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a monitor TV Connecting the video decksAM loop antenna assembly FM antenna adopter assembly Connecting the antenna terminalsConnecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacksConnecting the Multi Zone jacks Connecting the external input EXT. in jacksPrecautions when connecting speakers Connecting banana plugsSpeaker system connections ConnectionsProtector circuit Part Names and Functions Surround speaker system indicatorsFront Panel Surround Speaker A/BDISPLAY/SURR. Para Remote control unitSystem Setup button Setting UP the SystemPress this to display the system setup menu Cursor buttonsSurround speaker selector function Before setting up the system Setting the power amplifier assignmentSetting the type of speakers Parameters Setting the Subwoofer mode Assignment of low frequency signal rangeSubwoofer mode Setting Setting the delay timeOFF PreparationsOnce Meters or Feet is selected in , Delay Time screen appears automaticallySelect the speaker to be set Set the distance betweenSwitch to the Channel Level screen Select Test Tone Mode Setting the channel levelSelect Test Tone Start Select YesIs the same Setting the Digital In Assignment To select the input sourceTo select the digital input jack Set the multi pre-out output level adjustment Setting the on-screen display OSDSwitch to the On Screen Display screen Select on or OFF Multi Vol. LevelPress the Enter button Auto Preset Memory screen appears Auto tuner presetsOn-screen display signals After completing system setupRemote Control Unit Using the remote control unitInserting the batteries CD player CD system buttons Operating Denon audio componentsMD recorder MD, CD recorder CDR system buttons Tape deck Tape system buttonsEnter Code ResetCode no LearnOperating a component stored in the preset memory Checking the preset memory settingsOperate the component Learning function SYS Mode Storing system call signalsSystem call System call buttonsResetting Using the system call functionResetting the system call buttons Reset ALL Reset SYS Reset PRE Reset LRNSYS Mode SYS Call Resetting the preset memoryResetting learned buttons All reset function Auto search function Operation Turn on the power Press the Power switch buttonBefore operating Refer to Connections pages 6 to 13 and check that allInput mode selection function To select the input source when RECPlaying the input source Select the input source to be playedInput mode display Input signal displayExample Stereo Listening over headphones Adjusting the sound quality ToneAfter starting playback Turning the sound off temporarily MutingPlaying one source while recording another REC OUT mode Multi-source recording/playbackChecking the currently playing program source, etc This operation is not possible in the REC OUT mode Display switches as follows eachSelect Multi using Multi source switchesPress the EXT. in to switch External input Playback using the external input EXT. in jacksSet the external input EXT ModeMulti Room Music Entertainment System Multi-source and multi-zone playbackBefore playing with the surround function SurroundFader function Dolby Surround Pro Logic modeSelect the Dolby/DTS Surround mode Set the input mode to Auto or DTSSignal Detect indicator lights When playing sources On whichSurround parameters q Cinema EQ. Cinema Equalizer 7.1 SurroundCOMP. Dynamic Range Compression LFE Low Frequency EffectSurround modes and their features DSP Surround SimulationPersonal Memory Plus Set the parameters DSP surround simulationWhen turned clockwise When turned counterclockwisePress the Surround Parameter button Tone control setting Music CinemaManual tuning Auto tuningListening to the Radio TunerChecking the preset stations Preset memoryRecalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Types of multi-channel signals Additional InformationMovie audio Number of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Surround Dolby Digital Dolby Surround AC-3 Surround2Dolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDolby Pro Logic DTS Digital SurroundDolby Pro Logic compatible media and playback methods DTS compatible media and playback methodsDTS-ESTMMatrix DTS-ESTMDiscreteDTS Neo6TM surround DTS Neo6 CinemaDVD VDP Tape TV/DBS VCR-1 VCR-2 Surround modes and parametersSpecifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan
Top Page Image Contents