Denon AVR-3801 manual Setting the delay time, Off, Preparations

Page 22

2

3

Select the desired setting.

TUNING

 

 

We recommend setting this to

BAND

MODE

 

“OFF”.

TUNING

When set to “ON”, the

 

operation for software for which

 

no identification signals are

 

recorded is set.

ENTER

Enter the setting.

 

The System Setup Menu reappears.

SHIFT

 

Setting

 

OFF

Set the “OFF” mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the

 

identification signal described below is not recorded.

ON

This function only works with software on which a special identification signal is recorded. This software is scheduled to go on

 

sale in the future.

 

This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded

 

in 6.1 Source or DTS-ES or in the normal 5.1-channel mode without using the surround back speakers when the software is not

 

recorded in 6.1 Source or DTS-ES.

5 ch

Playback is conducted without using the surround back speaker.

7 ch

Playback is conducted using the surround back speaker. The same signals as those of the surround channels are output from the

 

surround back channel.

NOTES:

The “DTS-ES/6.1 Source Auto” setting screen is displayed when the surround back speaker is set to “Large” or “Small” at “Speaker Configuration”.

The surround back speakers can also be turned on and off using the “6.1/7.1 Surround” surround parameter. (See page 51.) Select the setting according to the program source to be played.

Setting the delay time

Input the distance between the listening position and the different speakers to set the delay time for the surround mode.

The delay time can be set separately for surround speakers A and B.

Preparations:

Measure the distances between the listening position and the speakers (L1 to L5 on the diagram at the right).

L1: Distance between center speaker and listening position

L2: Distance between front speakers and listening position

L3: Distance between surround speakers and listening position

L4: Distance between surround back speakers and listening position

L5: Distance between subwoofer and listening position

FL

Center

 

FR

Subwoofer

L1 L2

 

 

 

L5

 

Listening position

 

 

 

SL

L3

L4

SR

 

SBL

 

 

SBR

1

At the System Setup Menu select “Delay Time”.

 

 

TUNING

BAND

MODE

 

TUNING

21

Image 22
Contents AVR-3801 Page Safety Precautions Safety Instructions Table of Contents Before UsingFeatures Connecting the audio components ConnectionsConnecting video components Connecting a monitor TV Connecting a video component equipped with S-Video jacksPrecaution when using S-jacks Connecting the video decksConnecting the antenna terminals AM loop antenna assembly FM antenna adopter assemblyConnecting a DVD player DVD in jacks Connecting a monitor TV Monitor OUT jackConnecting the external input EXT. in jacks Connecting the Multi Zone jacksSpeaker system connections Connecting banana plugsPrecautions when connecting speakers ConnectionsProtector circuit Front Panel Surround speaker system indicatorsPart Names and Functions Surround Speaker A/BRemote control unit DISPLAY/SURR. ParaPress this to display the system setup menu Setting UP the SystemSystem Setup button Cursor buttonsSurround speaker selector function Setting the power amplifier assignment Before setting up the systemSetting the type of speakers Parameters Assignment of low frequency signal range Setting the Subwoofer modeSubwoofer mode OFF Setting the delay timeSetting PreparationsSelect the speaker to be set Delay Time screen appears automaticallyOnce Meters or Feet is selected in , Set the distance betweenSetting the channel level Switch to the Channel Level screen Select Test Tone ModeSelect Yes Select Test Tone StartIs the same To select the input source Setting the Digital In AssignmentTo select the digital input jack Switch to the On Screen Display screen Select on or OFF Setting the on-screen display OSDSet the multi pre-out output level adjustment Multi Vol. LevelAuto tuner presets Press the Enter button Auto Preset Memory screen appearsAfter completing system setup On-screen display signalsUsing the remote control unit Remote Control UnitInserting the batteries MD recorder MD, CD recorder CDR system buttons Operating Denon audio componentsCD player CD system buttons Tape deck Tape system buttonsCode no ResetEnter Code LearnChecking the preset memory settings Operating a component stored in the preset memoryOperate the component Learning function System call Storing system call signalsSYS Mode System call buttonsUsing the system call function ResettingResetting the system call buttons SYS Mode SYS Call Reset PRE Reset LRNReset ALL Reset SYS Resetting the preset memoryResetting learned buttons All reset function Auto search function Before operating Turn on the power Press the Power switch buttonOperation Refer to Connections pages 6 to 13 and check that allPlaying the input source To select the input source when RECInput mode selection function Select the input source to be playedInput signal display Input mode displayExample Stereo After starting playback Adjusting the sound quality ToneListening over headphones Turning the sound off temporarily MutingMulti-source recording/playback Playing one source while recording another REC OUT modeChecking the currently playing program source, etc Select Multi using Display switches as follows eachThis operation is not possible in the REC OUT mode Multi source switchesSet the external input EXT Playback using the external input EXT. in jacksPress the EXT. in to switch External input ModeMulti-source and multi-zone playback Multi Room Music Entertainment SystemSurround Before playing with the surround functionDolby Surround Pro Logic mode Fader functionSignal Detect indicator lights Set the input mode to Auto or DTSSelect the Dolby/DTS Surround mode When playing sources On whichCOMP. Dynamic Range Compression 7.1 SurroundSurround parameters q Cinema EQ. Cinema Equalizer LFE Low Frequency EffectDSP Surround Simulation Surround modes and their featuresPersonal Memory Plus DSP surround simulation Set the parametersWhen turned counterclockwise When turned clockwisePress the Surround Parameter button Tone control setting Cinema MusicListening to the Radio Auto tuningManual tuning TunerPreset memory Checking the preset stationsLast Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Additional Information Types of multi-channel signalsMovie audio Surround back speakers Number of surround back speakersSpeaker setting examples When using different surround speakers for movies and music When not using surround back speakers2Dolby Digital and Dolby Pro Logic SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital compatible media and playback methodsDolby Pro Logic compatible media and playback methods DTS Digital SurroundDolby Pro Logic DTS compatible media and playback methodsDTS Neo6TM surround DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6 CinemaSurround modes and parameters DVD VDP Tape TV/DBS VCR-1 VCR-2Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan