Carrier 19EX, 17 installation instructions Individual Component Ratings, Ph-Hz

Table 14 Ð Individual Component Ratings

POWER SOURCE	ITEM	AVERAGE kW	DESIGN CENTER	SUPPLY	FLA	LRA
			VOLTAGE	V-PH-HZ
	Seal Leakage	0.23	115	115-1-50/60	4.78	21.7
1*	Pump
(17EX Only)	Motor Space	0.50	115	115-1-50/60	4.35	4.35
	Heater
	Control Module	0.40	115	115-1-60	3.50	Ð
	and Actuator			115-1-50
1²
	Oil Sump Heater	1.00	115	115-1-60	8.70	Ð
				115-1-50
		1.35	220	200/240-3-60	4.32	24.5
		1.30	430	380/480-3-60	2.15	12.2
2²	Oil Pump	1.37	563	507/619-3-60	2.13	25.0
		1.49	230	220/240-3-50	4.83	28.0
		1.49	393	346/440-3-50	2.59	12.2
1**	Hot Gas	0.20	115	115-1-50/60	2.00	4.75
	Bypass
			204	200/208-3-60	10.90	63.5
3**	Pumpout		230	220/240-3-60	9.50	57.5
		3.41	460	440/480-3-60	4.70	28.8
(Optional)	Compressor
			575	550/600-3-60	3.80	23.0
			400	380/415-3-50	4.70	28.8

LEGEND

FLA Ð Full Load Amps LRA Ð Locked Rotor Amps

*Available for 17EX machines only. ²Available for 17/19EX machines.

**Available as an option on 17/19EX machines.

NOTE: The oil pump is powered through a ®eld wiring terminal into the power panel. Power to the controls and oil heater via the power panel must be on circuits that can provide continuous service when the compressor starter is disconnected.

22