Liebherr RI 1410/ RBI 1410/ FI 1051 General safety information Contents, Setting up the appliance

Page 2

General safety information

Contents

 

1

General safety information

2

2

Setting up the appliance

2

3

Planning information

4

4

Cabinet Opening Dimensions

7

5

Air circulation in the kitchen cabinet

7

6

Door swing clearance

8

7

Fitting décor panels

13

7.1

Fitting décor panels

13

7.2

Décor panel dimensions - Framed panels

14

7.3

Décor panel dimensions - Overlay panels

15

7.3

Single-unit installation

15

7.3

Side-by-side installation

16

7.3

Cut-out for glass window (WFI 1061)

19

8

Changing the door hinges

19

8.1

Remove soft stop mechanism (top)

19

8.2

Remove soft stop unit (bottom)

20

8.3

Remove door

20

8.4

Swapping bearing parts

21

8.5

Swapping the clip-on frame

21

8.6

Fitting the door

21

8.7

Fitting the soft stop mechanism (bottom)

22

8.8

Fitting soft stop mechanism (top)

22

8.9

Aligning the door

23

9

Adjusting the door opening angle

23

10

Water connection

24

11

Anti-tip device

25

12

Single unit installation

25

13

Side-by-side installation

28

14

Installing the water filter

33

15

Connecting the appliance

33

The manufacturer is constantly working to improve all models. Therefore please understand that we reserve the right to make design, equipment and technical modifications.

To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.

The instructions apply to several models, so there may be differences. Sections which only apply to certain appliances are indicated with an asterisk (*).

Instructions for action are marked with a , the results of action are marked with a .

1 General safety information

Read and follow these instructions. They contain safety advice which is important for safe and problem-free installation and operation. Always read and follow the safety advice.

 

 

DANGER

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, will result in

 

 

 

 

 

death or serious injury.

 

 

 

 

 

 

 

 

 

WARNING

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, could result in

 

 

 

 

 

death or serious injury.

 

 

 

 

 

 

 

 

 

CAUTION

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, will result in

 

 

 

 

 

minor or moderate injury.

 

 

 

 

 

 

 

 

 

NOTICE

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, could result in

 

 

 

 

 

damage to property.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

indicates useful advice and tips.

 

 

 

 

 

 

 

It is important that the guidelines and instructions in this manual are followed so that the appliance is correctly installed and operates properly. Read and understand all information in this manual before the appliance is installed.

2 Setting up the appliance

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a short circuit.

u The appliance is designed for use in enclosed spaces. Do not operate the appliance in open space or in damp areas or where there is spray.

WARNING

Danger of fire and damage!

u Do not place devices that give off heat, e.g. microwaves, toasters, etc. on the appliance.

CAUTION Risk of personal injury!

u Have two people move this appliance into place.

NOTICE

Risk of damage caused by condensation

Installing the appliance next to any other refrigerator or freezer can cause condensation or damage to the Liebherr appliance.

u Do not install this appliance next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side-by-side installation. They are equipped with a heating system to eliminate condensation when refrigerators or freezers are installed side-by-side.

NOTICE

Risk of damage for the finished floor surface!

u Protect the finished floor surface before you uncrate the unit.

2

Image 2
Contents Installation Instructions Setting up the appliance General safety information ContentsGeneral safety information Setting up the appliance Single-unit installation Planning informationSide-by-side installation SBS24I3, SBS24I1, SBS24I6 Planning information Cabinet Opening Dimensions Air circulation in the kitchen cabinetDoor swing clearance Air outlet110, hinges on left 90, hinges on left 110, hinges on right 90, hinges on right Fitting décor panels Fitting décor panelsDécor panel dimensions Framed panels Height H Overlay Panel Backer Panel Spacer PanelOverlay panel Spacer panel Backer panel Width W Thickness of panelSide-by-side installation Front viewOverlay panel Spacer panel Backer panel Spacer 1061 Changing the door hingesCut-out for glass window WFI Overlay panel Backer panel Spacer panel Glassed areaRemove soft stop unit bottom Remove doorFitting the door Swapping the clip-on frameSwapping bearing parts Loosen cover 9 from the panel 1 Removing the soft stop unit u Open the door Adjusting the door opening angleAligning the door Fit opening limiterWater connection Anti-tip device Single unit installationFit side installation strip Install the appliance in the recess Install end stripSecure side installation strips Fit upper ventilation grilleFit décor panels see Fit handles framed panel Fit handles overlay panelSide-by-side installation Fit side installation stripsJoin appliances Fit upper ventilation grille 80 or Secure side installation strip Fit end stripFit handles to the overlay panel 63as shown in the diagram Installing the water filter Connecting the applianceConnecting the appliance