Side-by-side installation
Fig. 68
u Open the door.
u Position ventilation grille Fig. 68 (30) over the installation contour Fig. 61 (14) and align it such that the holes in ventilation grille and installation contour are above each other.
u Screw ventilation grille Fig. 68 (30) to installation contour from below using four screws Fig. 68 (31).
Fit end strip:
Fig. 69
u Open the door.
u Position end strip Fig. 69 (30) over the installation contour Fig. 61 (14) and align it such that the holes in ventilation grille and installation contour are above each other.
u Screw end strip Fig. 69 (30) to installation contour from below using four screws Fig. 69 (31).
Secure side installation strip:
Fig. 70
u Remove adhesive tape from the side installation strip Fig. 70 (3).
u Push installation strip Fig. 70 (3) upwards until it is touching the ventilation grille Fig. 70 (30).
u Glue the adhesive plates Fig. 70 (40) above the retaining plate Fig. 60 (1) and the retaining plates Fig. 70 (4) respectively to the installation strip Fig. 70 (3) such that it cannot slide downwards.
Install the appliance in the recess:
u Connect appliance to the water supply (see 10) .* u Insert the power cable into the socket (see 15) .
Fig. 71
u Push the appliance into the recess until the rear edge of the ventilation grille Fig. 71 (30) is flush with the front edge of the side wall of the cabinet.
u Open the door.
31