Fitting décor panels
7 Fitting décor panels
NOTICE
Risk of fire and damage if insufficient ventilation!
u If you are replacing the factory air vents with an overlay, Do NOT restrict the air flow. The air flow must be the same or greater than the factory air vents of 31 in2 (200 cm2).
The door panel weight must not exceed 44 lb (20 kg)
7.1 Fitting décor panels
NOTICE
Risk of damage if wrongly assembled!
u The door handles must be installed before the screw covers are installed. If you fail to install the handles before the screw covers, you can damage the covers. The screw covers are taped to the unit doors during shipping. Use care when removing covers.
Fig. 14 | 3 | Screws for door frames | 5 | M4 x 10 screw for handle | |
1 | Door frames | ||||
2 | Decorative panel | 4 | Handle, depending on model | 6 | Filler strip |
u Proceed as shown in the illustration. |
|
|
|
| |
13