Rangemaster 90 Gas manual Be safe, Gas and Electricity on, Peculiar smells, Installation

Page 2

Be safe

Warning

Accessible parts will become hot in use. To avoid burns and scalds children should be kept away.

You need clean fresh air - so does your cooker. Burner flames produce exhaust gases, heat and moisture. Make sure that the kitchen is well ventilated: keep natural ventilation holes open or install a powered cooker hood that vents outside. If you have several burners on or use the cooker for a long time, open a window or turn on an extractor fan. For more detail see the Installation Instructions.

We recommend you read the ‘General Safety Instructions’ section if you have not used a gas cooker before. We describe some basic guidelines on how to use a gas cooker safely.

Gas and Electricity on

Make sure that the gas supply is turned on and that the cooker is wired in and switched on.

The cooker needs electricity.

Peculiar smells

When you first use your cooker it may give off a slight odour. This should stop after a little use.

Before using for the first time, make sure that all packing materials have been removed and then to dispel manufacturing odours, turn on the ovens and run for an hour.

Make sure the room is well ventilated to the outside air, by opening windows or turning on a cooker hood for example. We recommend that people with respiratory or allergy problems should vacate the area for this brief period.

Before using the grill for the first time you should also turn on the grill and run for 30 minutes with the grill pan in position, pushed fully back, and the grill door open.

Installation

In the UK the cooker must be installed by a CORGI registered engineer. Failure to install the appliance correctly could invalidate any warranty or liability claims and lead to prosecution

This appliance shall be installed in accordance with the regulations in force and only in a well ventilated space. Read the instructions before installing or using this appliance.

This appliance should not be installed in a boat or caravan.

2

Image 2
Contents 90 Gas Users Guide Be safe InstallationThis appliance should not be installed in a boat or caravan Gas and Electricity onContents Hotplate burners Griddle LP Gas GrillNatural gas Main Gas Oven Main Oven shelves HandyrackMain Oven light ‘S’ Slow cookingTall Oven electric Clock Clock Special Features Cooking using the timerAuto is showing, you want to reset to manual cooking Oven cooking Steam to disperseMain Gas Oven cooking guide Tall Fan electric Oven cooking guide LH hotplate Cleaning your cookerHotplate burners Wok burnerGrill GriddleControl Panel and Doors OvensOutside of cooker Cleaning Table HotplatePart Finish Recommended Cleaning Method Oven and GrillRemoving the Main Oven Linings Moving your cookerTall Oven Troubleshooting Oven temperature getting hotter as the cooker gets older Oven not coming on when turned on manuallyOven not coming on when automatic cooking Turn off the power supply0800 111 General Safety InstructionsIf you smell gas Don’t smokeThis appliance is heavy, take care when moving it Location of Cooker InstallationProvision of Ventilation They cannot be converted from one gas to the otherElectric drill Dear InstallerYou will also need the following tools Unpacking the Cooker Positioning the CookerChecking the parts Moving the Cooker LevellingFitting a stability bracket Fit the HandlesFitting the splash back optional Gas ConnectionElectrical checks Pressure testingElectrical Connection Grill checkCustomer care Main Oven checkFitting the plinth Thank youTo Remove the Control Panel To Remove Ignition/light SwitchServicing Notes To Remove Side PanelsMain RH oven To Remove ClockTo Remove a Thermostat Tall ovenTo Change Grill Electrode To Change Main Oven Burner AssemblyTo Change Grill Burner To Remove Main Oven BurnerTo Remove Grill Door To Adjust Main Oven Door Catch KeepTo Change Main Oven Electrode To Remove Main Oven DoorTo Change Fan in Tall Oven To Change Tall Oven Door Magnetic LatchTo Change Ignition Generator To Remove Tall Oven ElementCircuit Diagram Technical Data Page