John Lewis JLBIOS661 Oven Shelves and Shelf Supports, Removing the shelf support rails

6.Turn 2 fasteners by 90° and remove them from their seats.

Clean the glass panel with water and soap. Dry it carefully.

Warning! Only clean the glass panel with water and a soap. Abrasive cleaning agents, stain removers and sharp objects (e.g. knives or scrapers) can cause damage to the glass.

Inserting the door and the glass panel

When the cleaning procedure is completed, insert the glass panel and the oven door. To do so, do the steps in reverse.

The decorated internal panel marked with a decorative frame must be assembled with the screen-printing outside of the oven. The panel of glass is assembled correctly if you do not feel any roughness when you pass your fingers over the surface.

Insert the internal panel of glass into the right seats as on the picture.

90°

7. Carefully lift and remove the panel of glass.

2

1

Oven Shelves and Shelf Supports

To clean the oven cavity remove the shelf supports.

Removing the shelf support rails

1.Pull the rails away from the oven wall at the front.