John Lewis JLDWS1202 instruction manual Sample loading arrangements, Full load Half load

Page 30

Notes for Test Institutes

Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test cycle (see “Cycle Table”). Tests in accordance with EN 50242 must be carried out when the salt dispenser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respectively, and using the test cycle (see “Cycle Table”).

	Full load:	Half load:
	12 place settings	6 place settings including
	including serving	serving dishes, leaving alter-
	dishes	nate positions in the rack free
Amount of detergent required:	5g + 25g (Type B)	20g (Type B)

Rinse aid setting:	4 (Type III)	4 (Type III)

Sample loading arrangements:

Upper basket *)

*) If necessary, move the cup rack from right to left. When doing this, ensure that the cup rack is at the same height.

30

Image 30

Contents JLDWS1202 Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral Safety Diagram of Appliance Control PanelFunction button Setting manually Prior to Using for the First TimeSetting the Water Softener Setting electronically10L Only when using the dishwasher for the first time Adding Dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/Deactivating the Rinse Aid dispenserActivating/Deactivating the Acoustic Signal Daily Use Loading Cutlery and DishesLoading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesPage Adjusting the Height of the Upper Basket Raising/Lowering the Upper Bas- ketAdding Detergent Using 3in1 Detergents Concentrated detergentsDetergent tablets Selecting the Dishwashing Cycle Cycle Table Dishwashing Suitable TypeInterrupting or Cancelling a Dishwashing Cycle Cancelling the dishwashing cycleStarting a Dishwashing Cycle Cancelling the time delay Setting the Delay TimerTo change the time delay To change a dishwashing cycleCare and Cleaning Switching Off the DishwasherRemoving the Dishes Cleaning the Filters Reinsert the flat filterWhat to do if Remedying Small MalfunctionsMalfunction Possible cause Remedy Short warning tones Dishes do not dry and are not shining If the Dishwashing Results are not SatisfactoryDishes are still dirty There are dried water drops on the glasses and dishesPackaging material Technical DataDisposal Old applianceSample loading arrangements Full load Half loadPage Installation and Connection Instructions Safety Information for the InstallationInstalling the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the DishwasherConnecting to the water supply Permitted water pressureWater drainage Anti-flood systemElectrical Connection Changing a fuseGreen and Yellow Earth BlueNeutral BrownLive Connecting systems Service and Spare Parts 0870 01Subject to change without notice