Smeg P106NL manual Instructions for safe and proper use, Never Unplug By Pulling On The Cable

Contents 8. Cleaning and maintenance Contents7. Using the hob 1. Instructions for safe and proper use 2. Positioning of hobTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Instructions for safe and proper use1. Instructions for safe and proper use NEVER UNPLUG BY PULLING ON THE CABLE2.1 Attachment to support structure Instructions for the installer2. Positioning of hob Carefully position the insulation gasket supplied on the external perimeter of the hole made in the top surface see figures below and try to make it stick to the entire surface by applying light pressure with your hands. Refer to the distances shown in the figure for the model to be installed, keeping in mind that for both models the long front side has to skim the hole. Secure the hob to the counter with brackets A supplied. Carefully trim any excess from border B of the gasket. The distances in the following drawing refer to the hole on the inner side of the gasket 3. Electrical connection 4. Gas connection 4.3 Discharge of combustion products 4.1 Connection to LPG4.2 Ventilation of rooms 5. Adapting to different types of gas 5.1 Removing the hob5.2 Regulation for LPG 5.3 Regulation for natural gas5.6 Regulation of minimum for natural gas 5.4 Regulation of primary air5.5 Reassembling the hob 5.9 Lubrication of gas taps 5.7 Regulation of minimum for LPG5.8 Arrangement of burners on hob BURNERS6. Description of controls ARRANGEMENT OF BURNERS - Description of symbolsInstructions for the user 6.1 Front control panel7.2 Practical advice for using the burners 7. Using the hob7.1 Burner lighting with safety device 7.3 Diameter of containers8.2 Cleaning of components 8. Cleaning and maintenance8.1 Cleaning stainless steel Never use a steam jet to clean the appliance