Smeg P106NL manual Instructions for the installer

Contents Contents 7. Using the hob8. Cleaning and maintenance 1. Instructions for safe and proper use 2. Positioning of hobInstructions for safe and proper use 1. Instructions for safe and proper useTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLE2. Positioning of hob Instructions for the installer2.1 Attachment to support structure Carefully position the insulation gasket supplied on the external perimeter of the hole made in the top surface see figures below and try to make it stick to the entire surface by applying light pressure with your hands. Refer to the distances shown in the figure for the model to be installed, keeping in mind that for both models the long front side has to skim the hole. Secure the hob to the counter with brackets A supplied. Carefully trim any excess from border B of the gasket. The distances in the following drawing refer to the hole on the inner side of the gasket 3. Electrical connection 4. Gas connection 4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products 5. Adapting to different types of gas 5.1 Removing the hob5.2 Regulation for LPG 5.3 Regulation for natural gas5.5 Reassembling the hob 5.4 Regulation of primary air5.6 Regulation of minimum for natural gas 5.7 Regulation of minimum for LPG 5.8 Arrangement of burners on hob5.9 Lubrication of gas taps BURNERSARRANGEMENT OF BURNERS - Description of symbols Instructions for the user6. Description of controls 6.1 Front control panel7. Using the hob 7.1 Burner lighting with safety device7.2 Practical advice for using the burners 7.3 Diameter of containers8. Cleaning and maintenance 8.1 Cleaning stainless steel8.2 Cleaning of components Never use a steam jet to clean the appliance