Smeg GKC641-3 manual Instructions for the user, The cover

Page 18

Instructions for the user

8.2.2 The cover

Clean the glass or steel cover, where mounted, with warm water. Never use abrasive sponges or detergents. To clean the rear part of the cooktop, remove the cover by lifting out.

When finished cleaning, refit the cover making sure to insert it correctly. Before lifting up the cover, dry out properly.

Never lower the cover when burners or electric elements are on or still hot.

Image 18

Contents Index THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION plate for any reason4. GAS CONNECTION 4.1 Connection to LPG 4.2 Ventilation of rooms4.3 Discharge of combustion products 5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hobRated heating capacity kW 5.2 Regulation for LPGBurner LPG - G30/G31 28/37 mbar5.3 Regulation for natural gas 5.4 Regulation of primary air6. FINAL OPERATIONS 6.1 Regulation of minimum for natural gas6.2 Regulation of minimum for LPG This must be done by a qualified technician 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps BURNERS7. USING THE HOB Instructions for the user7.1 Ignition of the burners 7.4 Electric elements 7.2 Practical advice for using the burners7.3 Diameter of containers Burner7.4.2 Using the electric elements 8.2 Cleaning of cooking hob components 8. CLEANING AND MAINTENANCE8.1 Cleaning Before any intervention, disconnect the power supply of the device8.2.2 The cover