Smeg GKC641-3 Arrangement of burners on hob, Lubrication of gas taps, Burners, Auxiliary, Rapid

Page 13

6.3 Arrangement of burners on hob

Instructions for the installer

6.3 Arrangement of burners on hob

BURNERS

1	Auxiliary
2	Semi-rapid
3	Rapid
4	Rapid
5	Ultra rapid

6.4 Lubrication of gas taps

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

This must be done by a qualified technician.

33

Image 13

Contents Index 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Instructions for the installer plate for any reason 3. ELECTRICAL CONNECTION4. GAS CONNECTION 4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASBurner 5.2 Regulation for LPGRated heating capacity kW LPG - G30/G31 28/37 mbar5.4 Regulation of primary air 5.3 Regulation for natural gas6.1 Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG 6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobThis must be done by a qualified technician BURNERSInstructions for the user 7. USING THE HOB7.1 Ignition of the burners 7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Electric elements Burner7.4.2 Using the electric elements 8.1 Cleaning 8. CLEANING AND MAINTENANCE8.2 Cleaning of cooking hob components Before any intervention, disconnect the power supply of the device8.2.2 The cover