Smeg GKC641-3 manual Adaptation To Different Types Of Gas, Removing the hob

Page 9
5. ADAPTATION TO DIFFERENT TYPES OF GAS

Instructions for the installer

5. ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, detach the appliance from the electrical socket.

The hob has been inspected for G25 (2L 3B/P) at a pressure of 25 mbar. For functioning with other types of gas the nozzles must be replaced and the primary air adjusted.

To replace the nozzles and regulate the burners, you have to remove the top as described in the following paragraph.

5.1 Removing the hob

1.Remove all the knobs, the grids, the burner caps and the flame-caps;

2.remove the screws and the nuts A that secure the burner supports;

3.lift the hob from its seat;

4.replace the burner nozzles in accordance with the reference gas chart;

5.regulate the primary air as described in paragraph “5.2 Regulation for LPG”.

29

Image 9
Contents Index 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer plate for any reason 3. ELECTRICAL CONNECTION4. GAS CONNECTION 4.1 Connection to LPG 4.2 Ventilation of rooms4.3 Discharge of combustion products 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASBurner 5.2 Regulation for LPGRated heating capacity kW LPG - G30/G31 28/37 mbar5.4 Regulation of primary air 5.3 Regulation for natural gas6. FINAL OPERATIONS 6.1 Regulation of minimum for natural gas6.2 Regulation of minimum for LPG 6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobThis must be done by a qualified technician BURNERS7. USING THE HOB Instructions for the user7.1 Ignition of the burners 7.3 Diameter of containers 7.2 Practical advice for using the burners7.4 Electric elements Burner7.4.2 Using the electric elements 8.1 Cleaning 8. CLEANING AND MAINTENANCE8.2 Cleaning of cooking hob components Before any intervention, disconnect the power supply of the device8.2.2 The cover