Smeg ST1144S instruction manual Washing programs, Selecting Half Load Wash on some models only

Page 7

User instructions

1.2 Washing programs

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without obstruction.

•The dishwasher door is securely closed.

SELECTING HALF LOAD WASH (on some models only)

This function is ideal for small loads and saves water and electricity. It is controlled by the HALF LOAD (8) button, with two alternatives:

1)press the button once to select washing in the top basket (the relative light comes on);

2)press the button a second time to select washing in the bottom basket (the relative light comes on);

3)press the button a third time to return to the normal full load washing mode (washing in both baskets, both lights off).

When washing in the bottom basket only, the cutlery basket can be divided so that only half is used.

Image 7

Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controlsProgram Delay Button on some models only Setting the Washing Program and Switching on140 Changing the Program Cancelling the Current ProgramTable for Certification Bodies Reference standardSelecting Half Load Wash on some models only Washing programsExtra Programs Delaying the ProgramElectronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display Removing the Dishes END of CycleFault Description TroubleshootingWater intake system malfunction For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Water supply connection Installation and hook-upElectrical connection Connecting to the Water SupplyDrain Connection Operating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent 1 Products General warnings and recommendations User instructions Lower Basket Using the basketsEN 50242 Standard Loads for Certification Bodies EN 50242 cycle test conditionsLoading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketPush-button version Adjusting the Upper BasketAvoid the use of acidic or abrasive detergents Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ArmsProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598