Smeg ST1124S-1 instruction manual Switch Setting models without display

Page 10

User instructions

SWITCH SETTING (models without display)

According to the machine model, the selector which acts on the adjustment may be located:

•inside the plastic locking ring located on the right-handside, inside the dishwasher;

•inside the water softener, just below the cap.

Both allow for adjustment to 5 settings:

WATER HARDNESS TABLE

	WATER HARDNESS					SETTING

German Degrees (°dH)			French Degrees (°dF)
German Degrees (°dH)			French Degrees (°dF)

0	- 4		0	- 7		Setting N. 1 NO SALT

5 - 15			8 - 25			Setting N. 1

16	- 23		26	- 40		Setting N. 2

24	- 31		41	- 60		Setting N. 3

32	- 47		61	- 80		Setting N. 4

48	- 58		81 - 100			Setting N. 5

Contact your local water board for information on the hardness of your water supply.

Image 10

Contents Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Upper panel1 Option Button Setting the Washing Program and Switching on1 Option Light Programme Number & Symbol Load Crockery Cutlery Table for Certification Bodies Cancelling the Current ProgramWashing programs Reference standardSelecting Half Load Wash on some models only Extra ProgramsDelaying the Program 1 Option ButtonElectronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display END of Cycle Removing the DishesTroubleshooting Fault DescriptionWater intake system malfunction For Cleaning Dishwashers Contents Uses Other than Those Described Above Safety and operating instructionsNever be Removed Safety instructions Aquastop Models Appliance Installation instructions Installation and hook-upWater supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordFor Great Britain only When Cleaning and Maintaining the ApplianceFuse replacement This Appliance Must be EarthedUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Upper Basket Loading the Lower Basket Lower Basket½ Load Cutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketPush-button version Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergentsCleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598