Smeg ST1124S-1 instruction manual END of Cycle, Removing the Dishes

Page 11

User instructions

If the door has to be opened while washing is in progress, the program will be interrupted. The relative light will keep flashing and a beeper will signal that the cycle has not been completed. You must wait about 1 minute before closing the door to restart the program. When the door is closed the program will continue from where it was interrupted. This operation should only be carried out if strictly necessary, because it might cause problems in execution of the program.

END OF CYCLE

At the end of the washing cycle the dishwasher gives a short acustic signal and the program indicators nr 4 and 5 start blinking (the word "end" is displayed on the window).

To switch off the dishwasher, open the door and press the ON/OFF button (1).

REMOVING THE DISHES

At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.

Image 11

Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Description of the controls1 Option Light Setting the Washing Program and Switching on1 Option Button Programme Number & Symbol Load Crockery Cutlery Reference standard Cancelling the Current ProgramWashing programs Table for Certification BodiesExtra Programs Selecting Half Load Wash on some models only1 Option Button Delaying the ProgramWater Hardness Table Adjusting the Water Softening SystemElectronic Setting models with display Switch Setting models without display Removing the Dishes END of CycleFault Description TroubleshootingWater intake system malfunction For Cleaning Dishwashers Contents Never be Removed Safety and operating instructionsUses Other than Those Described Above Safety instructions Aquastop Models Appliance Installation and hook-up Installation instructionsDrain Connection Connecting to the Water SupplyWater supply connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsThis Appliance Must be Earthed When Cleaning and Maintaining the ApplianceFuse replacement For Great Britain onlyOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendations User instructions Lower Basket Upper Basket Using the basketsEN 50242 Standard Loads for Certification Bodies ½ Load Lower BasketLoading the Lower Basket Cutlery Basket Upper Basket Loading the Upper Basket Push-button version Adjusting the Upper BasketPull-out version Avoid the use of acidic or abrasive detergents Cleaning and maintenanceCleaning the Water Intake Filter Cleaning the Spray ArmsProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598