Smeg ST1124S-1 instruction manual Electrical connection and precautions

Page 22

Installation instructions

2.2 Electrical connection and precautions

CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR.

THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE.

THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.

NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE.

DO NOT USE ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID

THE POSSIBILITY OF OVERHEATING OR BURNING.

IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:

IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST 3.5MM. AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH.

THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN BELOW AND THE REGULATIONS IN FORCE.

L = brown N = blue

= yellow-green

In the event of damage to the supply cord, have it replaced by the manufacturer or an Authorized Technical Service Centre in order to avoid any risk.

Image 22

Contents Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Upper panel1 Option Button Setting the Washing Program and Switching on1 Option Light Programme Number & Symbol Load Crockery Cutlery Table for Certification Bodies Cancelling the Current ProgramWashing programs Reference standardSelecting Half Load Wash on some models only Extra ProgramsDelaying the Program 1 Option ButtonElectronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display END of Cycle Removing the DishesTroubleshooting Fault DescriptionWater intake system malfunction For Cleaning Dishwashers Contents Uses Other than Those Described Above Safety and operating instructionsNever be Removed Safety instructions Aquastop Models Appliance Installation instructions Installation and hook-upWater supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordFor Great Britain only When Cleaning and Maintaining the ApplianceFuse replacement This Appliance Must be EarthedUsing the water softening system Operating instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Upper Basket Loading the Lower Basket Lower Basket½ Load Cutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketPush-button version Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergentsCleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598