R E A R PA N E L
9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
INPUT (Channel 1) (1)
This XLR female
LOW OUTPUT (Channel 1) (2)
This XLR male
MID OUTPUT (Channel 1) (3)
This XLR male
HIGH OUTPUT (Channel 1) (4)
This XLR male
INPUT (Channel 2) (5)
This XLR female
LOW OUTPUT (Channel 2) (6)
This XLR male
MID OUTPUT (Channel 2) (7)
This XLR male
HIGH OUTPUT (Channel 2) (8)
This XLR male
IEC MAINS CONNECTOR (9)
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton.
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated equipment is properly grounded.
Incorporated into this IEC MAINS CONNECTOR is the MAINS FUSE HOLDER. If for any reason you are unable to power up this unit, remove the fuse by pulling out the holder. Check to see if the fuse is operational. If not, then replace with a fuse of the appropriate value and rating. If the fuse continues to fail contact your nearest Certified Peavey Service Center.
11