Sub-Zero 427RG, 427G manual Models 424G and 424FSG Installation Kickplate Installation, Door Panel

Page 12

Models 424G and 424FSG Installation

12

 

 

Kickplate Installation

Once the unit is leveled and wiring connections made, the kickplate can be installed. Use the two #10 x 1/2" stainless steel screws that are provided with the kickplate. Refer to the illustration below.

IMPORTANT NOTE: The kickplate must be removed for servicing. The floor cannot interfere with removal. The louvered section of the kickplate must not be covered so as to prevent air circulation.

Turn power back on to the electrical outlet.

Door Panel

MODEL 424G

Model 424G is offered in two design applications; stain- less steel (/S) and overlay (/O). Each of these designs have a full-view glass door.

The stainless steel model 424G/S is shipped from the factory with the decorative stainless steel door panel and matching handle in place.

The overlay model 424G/O is designed to accept a deco- rative door panel to match surrounding cabinetry. The door panel and the handle will be provided by the customer.

KICKPLATE

Before beginning installation, check for the correct com- ponents for the fit and finish desired. All overlay doors require a decorative panel 233/4" (603) x 301/16" (764), a minimum 5/8" (16) thick.

IMPORTANT NOTE: For installations at or above 5,000' (1524 m) in altitude, a special high altitude glass door unit (HAG) must be ordered.

If you have questions, contact your authorized Sub-Zero dealer or cabinet supplier. Additional panel information can be found in the Sub-Zero design guide.

Kickplate installation.

A solid panel cannot be installed over the glass door, as this may cause moisture to form behind the panel.

Image 12
Contents Wine Storage Contents Important NoteWine Storage Sub-Zero Wine Storage Subzero.comModels 424G and 424FSG Installation Overall DimensionsOpening Dimensions Tools and Materials RequiredModels 424G and 424FSG Installation Electrical Requirements Electrical RequirementsHome Alarm System Moving the UnitModel 424G Model 424FSGInstall Concrete Wedge Anchors Model 424FSG-WOOD FloorsModel 424FSG-CONCRETE Floors Models 424G and 424FSG Installation Position the Unit Models 424G and 424FSG Installation Level the Unit Home Alarm ConnectionsModels 424G and 424FSG Installation Kickplate Installation Door PanelModels 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Hinge Adjustment Complete the InstallationModels 427G and 427RG Installation Tools and Materials Required Opening Dimensions Models 427G and 427RG Installation Electrical Requirements Anti-Tip Bracket Installation Wood Floor Applications Concrete Floor ApplicationsDual Installations Lock InstallationUnpack the Unit Models 427G and 427RG Installation Position the Unit Models 427G and 427RG Installation Level the Unit Molding InstallationModels 427G and 427RG Installation Wiring Connections Door Panels Stainless steel panel Overlay panel Models 427G and 427RG Installation Overlay Door Panel Models 427G and 427RG Installation Drawer Panel Installation Model 427RGModels 427G and 427RG Installation Side Panels Installation ChecklistAnchoring Optional 90 Door StopModel WS-30 Installation Model WS-30 Installation Site Preparation Framed, Overlay and Stainless Steel Models Flush Inset Installation Opening Dimensions Detail aOpening Widths Dual Flush Inset Installation Opening Dimensions 263/16Model WS-30 Installation Electrical Requirements Model WS-30 Installation Anti-Tip Bracket Installation Anti-Tip Bracket HardwareFloor Model WS-30 Installation Unpack the Unit Grille Height AdjustmentGrille Removal Model WS-30 Installation Position the Unit Model WS-30 Installation Door Adjustment OUT AdjustmentSide to Side Tilt Adjustment Door Height AdjustmentModel WS-30 Installation Panel Installation Install Kickplate Model WS-30 Installation Framed Panel Framed Panel InstallationFramed Panel Specifications Raised PanelModel WS-30 Installation Overlay Panels Overlay Panel Specifications Grille Panel AssemblyModel WS-30 Installation Flush Inset Panels Flush Inset Panel Specifications Model WS-30 Installation Flush Inset Panel Dual InstallationsDual Standard Installations Flush Inset Panels-Dual Installation Dual Flush Inset InstallationsOpposite hinges Model WS-30 Installation Side Panels Custom Side Panel InstallationInstallation Checklist Service Information SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 3.57 Kb

424G, 424FSG, 427G, 427RG specifications

Sub-Zero has long been synonymous with premium refrigeration technology, and their models 427RG, 427G, 424FSG, and 424G exemplify this legacy of excellence. These refrigerators are designed for culinary enthusiasts, offering both unparalleled performance and sophisticated design.

The Sub-Zero 427RG and 427G are part of the brand's 400 series, known for their dual refrigeration systems. This technology utilizes separate cooling systems for the refrigerator and freezer compartments, which helps maintain optimal humidity levels and prevents the transfer of odors. The models feature advanced air purification systems that continuously filter and circulate air, ensuring that food stays fresher for longer. Additionally, the 427RG model comes with a glass door option, providing visibility to its premium contents while adding a stunning aesthetic to any kitchen.

In terms of storage, both 427RG and 427G models offer ample capacity with adjustable shelves and customizable bin configurations. The shelving is crafted from elegant glass, which adds a touch of sophistication. With features such as a niche drawer for fresh produce, users can easily organize their groceries while maximizing space efficiency.

The Sub-Zero 424FSG and 424G models are similarly impressive, though they come with their own set of unique features. The 424FSG, for instance, includes a full-width freezer drawer, equipped with an ice maker and ample storage space, making it ideal for those who require extra freezing capacity. The 424G, on the other hand, seamlessly integrates a clean, modern design with robust functionality. Both models benefit from an intuitive touch control system that allows for precise temperature adjustments, alongside soft-close drawers that enhance user convenience and reduce wear.

Energy efficiency is another hallmark of Sub-Zero’s design philosophy. All four models are ENERGY STAR rated, combining performance with environmentally conscious technology. This commitment to quality and sustainability extends to their use of durable materials and craftsmanship, ensuring longevity and reliability for years to come.

Whether you choose the sleek sophistication of the 427RG and 427G or the functional elegance of the 424FSG and 424G, Sub-Zero offers a refrigeration solution that balances innovation with traditional craftsmanship. These refrigerators are not just appliances; they are an investment in kitchen sophistication and food preservation excellence. With their state-of-the-art features, these models exemplify how Sub-Zero remains at the forefront of luxury refrigeration.