Sub-Zero 424G Model WS-30 Installation Unpack the Unit, Grille Removal, Grille Height Adjustment

Page 39

Model WS-30 Installation

39

Unpack the Unit

Uncrate the wine storage unit and inspect for any damages. Remove the wood base and discard the shipping bolts and brackets that hold the wood base to the bottom of the unit. Remove and discard all packing materials.

IMPORTANT NOTE: Do not discard the kickplate, anti-tip brackets and hardware. These items will be needed for installation.

Retract the front leveling legs all the way up to allow the unit to be moved into position more easily. You will extend the front leveling legs down and make adjustments once the unit is in position.

Remove the drain pan from the base of the unit to avoid damage to the drain pan, and allow for proper placement of the appliance dolly.

subzero.com

Grille Removal

In order to prevent damage to the grille and to access the power cord, the top grille assembly should be removed prior to moving the unit.

To remove the grille assembly, pull out on the bottom edge of the grille and tilt upward. Loosen the back two grille mounting screws and remove the front two grille mounting screws. Refer to the illustrations below. With the grille held firmly, pull forward to remove.

To reinstall the grille, insert the grille into position and be sure that the grille catch tabs are engaged. Reinstall the front two grille screws, then retighten the back two grille screws. Check for proper fit.

GRILLE HEIGHT ADJUSTMENT

The grille was designed to rest on the upper door hinge to minimize the reveal between the top of the door and bottom of the grille. To eliminate potential interference of the grille and hinge, the grille height can be adjusted. Loosen the four grille adjustment screws (two on each side) and adjust the grille height as needed. For screw location, refer to the illustration below.

 

LOCATION

BACK GRILLE

OF GRILLE

SCREW

ADJUSTMENT

 

SCREWS

 

FRONT

GRILLE SCREW

Grille removal.

Grille mounting screws.

Image 39
Contents Wine Storage Important Note ContentsSubzero.com Wine Storage Sub-Zero Wine StorageOverall Dimensions Models 424G and 424FSG InstallationTools and Materials Required Opening DimensionsElectrical Requirements Models 424G and 424FSG Installation Electrical RequirementsMoving the Unit Home Alarm SystemModel 424FSG Model 424GInstall Concrete Wedge Anchors Model 424FSG-WOOD FloorsModel 424FSG-CONCRETE Floors Models 424G and 424FSG Installation Position the Unit Home Alarm Connections Models 424G and 424FSG Installation Level the UnitDoor Panel Models 424G and 424FSG Installation Kickplate InstallationModels 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Overlay Door Panel Complete the Installation Models 424G and 424FSG Installation Hinge AdjustmentModels 427G and 427RG Installation Tools and Materials Required Opening Dimensions Models 427G and 427RG Installation Electrical Requirements Anti-Tip Bracket Installation Concrete Floor Applications Wood Floor ApplicationsDual Installations Lock InstallationUnpack the Unit Models 427G and 427RG Installation Position the Unit Molding Installation Models 427G and 427RG Installation Level the UnitModels 427G and 427RG Installation Wiring Connections Door Panels Stainless steel panel Overlay panel Models 427G and 427RG Installation Overlay Door Panel Model 427RG Models 427G and 427RG Installation Drawer Panel InstallationOptional 90 Door Stop Models 427G and 427RG Installation Side PanelsInstallation Checklist AnchoringModel WS-30 Installation Model WS-30 Installation Site Preparation Framed, Overlay and Stainless Steel Models Detail a Flush Inset Installation Opening DimensionsOpening Widths 263/16 Dual Flush Inset Installation Opening DimensionsModel WS-30 Installation Electrical Requirements Anti-Tip Bracket Hardware Model WS-30 Installation Anti-Tip Bracket InstallationFloor Model WS-30 Installation Unpack the Unit Grille Height AdjustmentGrille Removal Model WS-30 Installation Position the Unit Door Height Adjustment Model WS-30 Installation Door AdjustmentOUT Adjustment Side to Side Tilt AdjustmentModel WS-30 Installation Panel Installation Install Kickplate Framed Panel Installation Model WS-30 Installation Framed PanelRaised Panel Framed Panel SpecificationsModel WS-30 Installation Overlay Panels Grille Panel Assembly Overlay Panel SpecificationsModel WS-30 Installation Flush Inset Panels Flush Inset Panel Specifications Model WS-30 Installation Flush Inset Panel Dual InstallationsDual Standard Installations Dual Flush Inset Installations Flush Inset Panels-Dual InstallationOpposite hinges Custom Side Panel Installation Model WS-30 Installation Side PanelsInstallation Checklist Service Information SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 3.57 Kb

424G, 424FSG, 427G, 427RG specifications

Sub-Zero has long been synonymous with premium refrigeration technology, and their models 427RG, 427G, 424FSG, and 424G exemplify this legacy of excellence. These refrigerators are designed for culinary enthusiasts, offering both unparalleled performance and sophisticated design.

The Sub-Zero 427RG and 427G are part of the brand's 400 series, known for their dual refrigeration systems. This technology utilizes separate cooling systems for the refrigerator and freezer compartments, which helps maintain optimal humidity levels and prevents the transfer of odors. The models feature advanced air purification systems that continuously filter and circulate air, ensuring that food stays fresher for longer. Additionally, the 427RG model comes with a glass door option, providing visibility to its premium contents while adding a stunning aesthetic to any kitchen.

In terms of storage, both 427RG and 427G models offer ample capacity with adjustable shelves and customizable bin configurations. The shelving is crafted from elegant glass, which adds a touch of sophistication. With features such as a niche drawer for fresh produce, users can easily organize their groceries while maximizing space efficiency.

The Sub-Zero 424FSG and 424G models are similarly impressive, though they come with their own set of unique features. The 424FSG, for instance, includes a full-width freezer drawer, equipped with an ice maker and ample storage space, making it ideal for those who require extra freezing capacity. The 424G, on the other hand, seamlessly integrates a clean, modern design with robust functionality. Both models benefit from an intuitive touch control system that allows for precise temperature adjustments, alongside soft-close drawers that enhance user convenience and reduce wear.

Energy efficiency is another hallmark of Sub-Zero’s design philosophy. All four models are ENERGY STAR rated, combining performance with environmentally conscious technology. This commitment to quality and sustainability extends to their use of durable materials and craftsmanship, ensuring longevity and reliability for years to come.

Whether you choose the sleek sophistication of the 427RG and 427G or the functional elegance of the 424FSG and 424G, Sub-Zero offers a refrigeration solution that balances innovation with traditional craftsmanship. These refrigerators are not just appliances; they are an investment in kitchen sophistication and food preservation excellence. With their state-of-the-art features, these models exemplify how Sub-Zero remains at the forefront of luxury refrigeration.