Sub-Zero 427G, 427RG, 424FSG, 424G manual Framed Panel Specifications, Raised Panel

Model WS-30 Installation 45

subzero.com

Framed Panel

RAISED PANEL

With some door panel designs, you may have to rout, recess or use optional extended handles to allow for finger clearance. This is particularly true if your unit has raised panels greater than 1/4" (6) total thickness.

Check the location of offset when you’re using specific routing for the grip area only. Refer to the Sub-Zero design guide for a full-scale template of the standard full-length handle and panel. Use this template to lay out your panel design for finger clearance when a standard full-length handle is used.

IMPORTANT NOTE: The weight of the framed panel must not exceed 75 lbs (34 kg).

A solid panel cannot be installed over the glass door, as this may cause moisture to form behind the panel.

Framed Panel Specifications

	A
A	A
	H
	A
	W

Model WS-30

DOOR	W	H
Door Panel	293/4" (756)	699/16" (1767)
WINDO W	W	H
Cut-Out	231/2" (597)	635/16" (1608)
		A
Location		31/8" (79)