Sub-Zero 427RG, 427G, 424FSG, 424G manual Wood Floor Applications, Concrete Floor Applications

Page 20

Models 427G and 427RG Installation

20

 

 

Anti-Tip Bracket Installation

WOOD FLOOR APPLICATIONS

Use the six #12 x 21/2" wood screws and the six 1/4" flat washers provided. Drill pilot holes 3/16" (5) diameter maximum, and make sure the screws penetrate through the flooring material and into the wall plate a minimum of 3/4" (19). Make sure the screws hold tight. Refer to the illustration below.

CONCRETE FLOOR APPLICATIONS

Use the two 3/8" x 3 3/4" concrete wedge anchors, two #12 x 21/2" wood screws and two 1/4" flat washers provided. Make sure the anchors and screws hold tight. Refer to the illustration below.

Anti-Tip Bracket Placement

A

Wood Floor

131/2" (343)

Concrete Floor

131/2" (343)

INSTALL CONCRETE WEDGE ANCHORS:

1)Drill a 3/8" (10) diameter hole any depth exceeding the minimum embedment. Clean the hole or continue drilling additional depth to accommodate drill fines. Use a carbide drill bit manufactured within ANSI B94.12-77.

2)Assemble the washer and nut flush with the end of anchor to protect threads. Drive the anchor through the material to be fastened until the washer is flush with the surface material.

3)Expand the anchor by tightening the nut 3–5 turns past hand-tight position or to 25 foot-pounds of torque.

Always wear safety glasses and use other necessary protective devices or apparel when installing or working with anchors.

A

A

FINISHED

FLOORING

WALL PLATE

SUBFLOORING

WOOD FLOOR

A

A

 

 

FINISHED

 

FLOORING

WALL PLATE

 

SUBFLOORING

 

CONCRETE

11/2"(38)

FLOOR

min

 

Anchors are not recommended for use in lightweight masonry material such as block or brick, or for use in new concrete which has not had sufficient time to cure. The use of core drills is not recommended to drill holes for the anchors.

Wood floor.

Concrete floor.

Image 20
Contents Wine Storage Contents Important NoteWine Storage Sub-Zero Wine Storage Subzero.comModels 424G and 424FSG Installation Overall DimensionsOpening Dimensions Tools and Materials RequiredModels 424G and 424FSG Installation Electrical Requirements Electrical RequirementsHome Alarm System Moving the UnitModel 424G Model 424FSGModel 424FSG-CONCRETE Floors Install Concrete Wedge AnchorsModel 424FSG-WOOD Floors Models 424G and 424FSG Installation Position the Unit Models 424G and 424FSG Installation Level the Unit Home Alarm ConnectionsModels 424G and 424FSG Installation Kickplate Installation Door PanelModels 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Hinge Adjustment Complete the InstallationModels 427G and 427RG Installation Tools and Materials Required Opening Dimensions Models 427G and 427RG Installation Electrical Requirements Anti-Tip Bracket Installation Wood Floor Applications Concrete Floor ApplicationsUnpack the Unit Dual InstallationsLock Installation Models 427G and 427RG Installation Position the Unit Models 427G and 427RG Installation Level the Unit Molding InstallationModels 427G and 427RG Installation Wiring Connections Door Panels Stainless steel panel Overlay panel Models 427G and 427RG Installation Overlay Door Panel Models 427G and 427RG Installation Drawer Panel Installation Model 427RGModels 427G and 427RG Installation Side Panels Installation ChecklistAnchoring Optional 90 Door StopModel WS-30 Installation Model WS-30 Installation Site Preparation Framed, Overlay and Stainless Steel Models Flush Inset Installation Opening Dimensions Detail aOpening Widths Dual Flush Inset Installation Opening Dimensions 263/16Model WS-30 Installation Electrical Requirements Model WS-30 Installation Anti-Tip Bracket Installation Anti-Tip Bracket HardwareFloor Grille Removal Model WS-30 Installation Unpack the UnitGrille Height Adjustment Model WS-30 Installation Position the Unit Model WS-30 Installation Door Adjustment OUT AdjustmentSide to Side Tilt Adjustment Door Height AdjustmentModel WS-30 Installation Panel Installation Install Kickplate Model WS-30 Installation Framed Panel Framed Panel InstallationFramed Panel Specifications Raised PanelModel WS-30 Installation Overlay Panels Overlay Panel Specifications Grille Panel AssemblyModel WS-30 Installation Flush Inset Panels Flush Inset Panel Specifications Dual Standard Installations Model WS-30 Installation Flush Inset PanelDual Installations Flush Inset Panels-Dual Installation Dual Flush Inset InstallationsOpposite hinges Model WS-30 Installation Side Panels Custom Side Panel InstallationInstallation Checklist Service Information SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 3.57 Kb

424G, 424FSG, 427G, 427RG specifications

Sub-Zero has long been synonymous with premium refrigeration technology, and their models 427RG, 427G, 424FSG, and 424G exemplify this legacy of excellence. These refrigerators are designed for culinary enthusiasts, offering both unparalleled performance and sophisticated design.

The Sub-Zero 427RG and 427G are part of the brand's 400 series, known for their dual refrigeration systems. This technology utilizes separate cooling systems for the refrigerator and freezer compartments, which helps maintain optimal humidity levels and prevents the transfer of odors. The models feature advanced air purification systems that continuously filter and circulate air, ensuring that food stays fresher for longer. Additionally, the 427RG model comes with a glass door option, providing visibility to its premium contents while adding a stunning aesthetic to any kitchen.

In terms of storage, both 427RG and 427G models offer ample capacity with adjustable shelves and customizable bin configurations. The shelving is crafted from elegant glass, which adds a touch of sophistication. With features such as a niche drawer for fresh produce, users can easily organize their groceries while maximizing space efficiency.

The Sub-Zero 424FSG and 424G models are similarly impressive, though they come with their own set of unique features. The 424FSG, for instance, includes a full-width freezer drawer, equipped with an ice maker and ample storage space, making it ideal for those who require extra freezing capacity. The 424G, on the other hand, seamlessly integrates a clean, modern design with robust functionality. Both models benefit from an intuitive touch control system that allows for precise temperature adjustments, alongside soft-close drawers that enhance user convenience and reduce wear.

Energy efficiency is another hallmark of Sub-Zero’s design philosophy. All four models are ENERGY STAR rated, combining performance with environmentally conscious technology. This commitment to quality and sustainability extends to their use of durable materials and craftsmanship, ensuring longevity and reliability for years to come.

Whether you choose the sleek sophistication of the 427RG and 427G or the functional elegance of the 424FSG and 424G, Sub-Zero offers a refrigeration solution that balances innovation with traditional craftsmanship. These refrigerators are not just appliances; they are an investment in kitchen sophistication and food preservation excellence. With their state-of-the-art features, these models exemplify how Sub-Zero remains at the forefront of luxury refrigeration.