Sub-Zero 427G, 427RG manual Models 424G and 424FSG Installation Overlay Door Panel

Page 13

Models 424G and 424FSG Installation

13

Overlay Door Panel

MODEL 424G

Inspect the door panel for the minimum 5/8" (16) thickness, the finished inside edge. The glass door has a 10 lbs (5 kg) weight limit. Refer to the wine storage section of the Sub-Zero design guide for additional panel information.

Decide if the handle will be attached through the glass door frame or just through the decorative door panel. If it is just through the door panel, the handle must be attached first.

Decorative panels are attached to the model 424G door using #8 x 5/8" square drive screws passing through the door frame from the rear, behind the gasket into the panel. The door panel is marked for screw locations by the use of tenon centers, which are temporarily inserted into the

1/4" (6) diameter holes in the front of the glass door frame. Refer to the illustration below.

With the wine storage unit secured in position and the door closed, the panel is held in the desired position on the door and rapped by hand from the front, putting center marks on the rear surface of the panel. If the door panel is made of such a material that pre-drilling is needed, all of the mounting holes should be marked. If not, only enough holes to hold the panel in place temporarily, are necessary.

subzero.com

The door panel is then lowered from the door frame, tenon centers removed, the door opened and the screws driven into the panel through the black tape on the door frame, using the center marks to locate the screws.

The screw holes inside the door are hidden under a cover flap on the door gasket. It is necessary to lift the flap to insert the screws. Use as many screws as necessary to hold the door panel in place properly.

IMPORTANT NOTE: After the first three or four mounting screws are in place, but not completely tightened, close the door and check your panel fit. This is the time to make small adjustments. Once you are satisfied with the appear- ance, open the door and apply the remainder of the screws. Check all screws for tightness.

The metal frame on the glass door has numerous mounting holes on each side of the door. This is to accommodate the Sub-Zero accessory handles and provide for easy attachment of the handle through the door frame.

If you choose not to use the pre-drilled handle mounting holes, it will be necessary to fasten the handle from the rear of the door panel only, or drill one or more additional holes through the metal frame of the glass door.

OVERLAY

PANEL

DOOR

FRAME

TENON CENTER

GASKET

13/32" (11)

 

 

DIAMETER

 

GLASS

 

1/4" (6)

 

DIAMETER

The cross section illustration shows how this hole passes through the door frame. The hole center is on the small locator groove in the front of the frame. A 1/4" (6) diameter hole is made in the front wall of the extrusion and a 13/32"

(11)diameter hole through the rest of the frame.

Overlay panel.

Door frame cross section.

Image 13
Contents Wine Storage Important Note ContentsSubzero.com Wine Storage Sub-Zero Wine StorageOverall Dimensions Models 424G and 424FSG InstallationTools and Materials Required Opening DimensionsElectrical Requirements Models 424G and 424FSG Installation Electrical RequirementsMoving the Unit Home Alarm SystemModel 424FSG Model 424GModel 424FSG-WOOD Floors Install Concrete Wedge AnchorsModel 424FSG-CONCRETE Floors Models 424G and 424FSG Installation Position the Unit Home Alarm Connections Models 424G and 424FSG Installation Level the UnitDoor Panel Models 424G and 424FSG Installation Kickplate InstallationModels 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Overlay Door Panel Complete the Installation Models 424G and 424FSG Installation Hinge AdjustmentModels 427G and 427RG Installation Tools and Materials Required Opening Dimensions Models 427G and 427RG Installation Electrical Requirements Anti-Tip Bracket Installation Concrete Floor Applications Wood Floor ApplicationsLock Installation Dual InstallationsUnpack the Unit Models 427G and 427RG Installation Position the Unit Molding Installation Models 427G and 427RG Installation Level the UnitModels 427G and 427RG Installation Wiring Connections Door Panels Stainless steel panel Overlay panel Models 427G and 427RG Installation Overlay Door Panel Model 427RG Models 427G and 427RG Installation Drawer Panel InstallationInstallation Checklist Models 427G and 427RG Installation Side PanelsAnchoring Optional 90 Door StopModel WS-30 Installation Model WS-30 Installation Site Preparation Framed, Overlay and Stainless Steel Models Detail a Flush Inset Installation Opening DimensionsOpening Widths 263/16 Dual Flush Inset Installation Opening DimensionsModel WS-30 Installation Electrical Requirements Anti-Tip Bracket Hardware Model WS-30 Installation Anti-Tip Bracket InstallationFloor Grille Height Adjustment Model WS-30 Installation Unpack the UnitGrille Removal Model WS-30 Installation Position the Unit OUT Adjustment Model WS-30 Installation Door AdjustmentSide to Side Tilt Adjustment Door Height AdjustmentModel WS-30 Installation Panel Installation Install Kickplate Framed Panel Installation Model WS-30 Installation Framed PanelRaised Panel Framed Panel SpecificationsModel WS-30 Installation Overlay Panels Grille Panel Assembly Overlay Panel SpecificationsModel WS-30 Installation Flush Inset Panels Flush Inset Panel Specifications Dual Installations Model WS-30 Installation Flush Inset PanelDual Standard Installations Dual Flush Inset Installations Flush Inset Panels-Dual InstallationOpposite hinges Custom Side Panel Installation Model WS-30 Installation Side PanelsInstallation Checklist Service Information SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 3.57 Kb

424G, 424FSG, 427G, 427RG specifications

Sub-Zero has long been synonymous with premium refrigeration technology, and their models 427RG, 427G, 424FSG, and 424G exemplify this legacy of excellence. These refrigerators are designed for culinary enthusiasts, offering both unparalleled performance and sophisticated design.

The Sub-Zero 427RG and 427G are part of the brand's 400 series, known for their dual refrigeration systems. This technology utilizes separate cooling systems for the refrigerator and freezer compartments, which helps maintain optimal humidity levels and prevents the transfer of odors. The models feature advanced air purification systems that continuously filter and circulate air, ensuring that food stays fresher for longer. Additionally, the 427RG model comes with a glass door option, providing visibility to its premium contents while adding a stunning aesthetic to any kitchen.

In terms of storage, both 427RG and 427G models offer ample capacity with adjustable shelves and customizable bin configurations. The shelving is crafted from elegant glass, which adds a touch of sophistication. With features such as a niche drawer for fresh produce, users can easily organize their groceries while maximizing space efficiency.

The Sub-Zero 424FSG and 424G models are similarly impressive, though they come with their own set of unique features. The 424FSG, for instance, includes a full-width freezer drawer, equipped with an ice maker and ample storage space, making it ideal for those who require extra freezing capacity. The 424G, on the other hand, seamlessly integrates a clean, modern design with robust functionality. Both models benefit from an intuitive touch control system that allows for precise temperature adjustments, alongside soft-close drawers that enhance user convenience and reduce wear.

Energy efficiency is another hallmark of Sub-Zero’s design philosophy. All four models are ENERGY STAR rated, combining performance with environmentally conscious technology. This commitment to quality and sustainability extends to their use of durable materials and craftsmanship, ensuring longevity and reliability for years to come.

Whether you choose the sleek sophistication of the 427RG and 427G or the functional elegance of the 424FSG and 424G, Sub-Zero offers a refrigeration solution that balances innovation with traditional craftsmanship. These refrigerators are not just appliances; they are an investment in kitchen sophistication and food preservation excellence. With their state-of-the-art features, these models exemplify how Sub-Zero remains at the forefront of luxury refrigeration.