Sub-Zero 427RG, 427G, 424FSG, 424G manual Model WS-30 Installation Position the Unit, Level the Unit

Page 40

Model WS-30 Installation

40

 

 

Position the Unit

Before moving model WS-30 into position, secure the door closed and protect any finished flooring.

Use an appliance dolly to move the unit near the rough opening. Model WS-30 is equipped with rollers, so it can be moved into position more easily. If possible, keep the door closed until the unit is properly anchored.

IMPORTANT NOTE: If for any reason the unit has been laid on its back or side, you must allow the unit to stand upright for a minimum of 24 hours before connecting power.

IMPORTANT NOTE: If used, side panels will need to be installed before the unit is placed in its final position. Refer to page 53.

The rear levelers must be in their lowest position in order to roll the unit back into the rough opening. Leveling cannot be completed until the unit is in position.

Shut off power to the electrical outlet. Plug the power cord into the grounded outlet and roll the unit into position. Make sure the anti-tip brackets are properly engaged.

Level the Unit

Once the unit is in position, extend the front leveling legs down by turning the legs clockwise to adjust the height. The rear height adjustment can be made from the front of the base. Use a 3/8" socket to adjust the rear rollers. Turn the 3/8" hex bolt clockwise to raise the unit or counter- clockwise to lower it. Refer to the illustration below for location of the rear roller base adjustment.

When the unit is properly leveled, door adjustments are less likely to be necessary.

IMPORTANT NOTE: Be sure to reference leveling of the unit to the floor and not surrounding cabinetry. This could affect the operation of the unit, such as door closing.

To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with the floor.

FRONT

LEVELING LEG

REAR

ADJUSTMENT

Rear roller base adjustment.

Image 40
Contents Wine Storage Contents Important NoteWine Storage Sub-Zero Wine Storage Subzero.comModels 424G and 424FSG Installation Overall DimensionsOpening Dimensions Tools and Materials RequiredModels 424G and 424FSG Installation Electrical Requirements Electrical RequirementsHome Alarm System Moving the UnitModel 424G Model 424FSGModel 424FSG-WOOD Floors Install Concrete Wedge AnchorsModel 424FSG-CONCRETE Floors Models 424G and 424FSG Installation Position the Unit Models 424G and 424FSG Installation Level the Unit Home Alarm ConnectionsModels 424G and 424FSG Installation Kickplate Installation Door PanelModels 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Overlay Door Panel Models 424G and 424FSG Installation Hinge Adjustment Complete the InstallationModels 427G and 427RG Installation Tools and Materials Required Opening Dimensions Models 427G and 427RG Installation Electrical Requirements Anti-Tip Bracket Installation Wood Floor Applications Concrete Floor ApplicationsLock Installation Dual InstallationsUnpack the Unit Models 427G and 427RG Installation Position the Unit Models 427G and 427RG Installation Level the Unit Molding InstallationModels 427G and 427RG Installation Wiring Connections Door Panels Stainless steel panel Overlay panel Models 427G and 427RG Installation Overlay Door Panel Models 427G and 427RG Installation Drawer Panel Installation Model 427RGModels 427G and 427RG Installation Side Panels Installation ChecklistAnchoring Optional 90 Door StopModel WS-30 Installation Model WS-30 Installation Site Preparation Framed, Overlay and Stainless Steel Models Flush Inset Installation Opening Dimensions Detail aOpening Widths Dual Flush Inset Installation Opening Dimensions 263/16Model WS-30 Installation Electrical Requirements Model WS-30 Installation Anti-Tip Bracket Installation Anti-Tip Bracket HardwareFloor Grille Height Adjustment Model WS-30 Installation Unpack the UnitGrille Removal Model WS-30 Installation Position the Unit Model WS-30 Installation Door Adjustment OUT AdjustmentSide to Side Tilt Adjustment Door Height AdjustmentModel WS-30 Installation Panel Installation Install Kickplate Model WS-30 Installation Framed Panel Framed Panel InstallationFramed Panel Specifications Raised PanelModel WS-30 Installation Overlay Panels Overlay Panel Specifications Grille Panel AssemblyModel WS-30 Installation Flush Inset Panels Flush Inset Panel Specifications Dual Installations Model WS-30 Installation Flush Inset PanelDual Standard Installations Flush Inset Panels-Dual Installation Dual Flush Inset InstallationsOpposite hinges Model WS-30 Installation Side Panels Custom Side Panel InstallationInstallation Checklist Service Information SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 3.57 Kb

424G, 424FSG, 427G, 427RG specifications

Sub-Zero has long been synonymous with premium refrigeration technology, and their models 427RG, 427G, 424FSG, and 424G exemplify this legacy of excellence. These refrigerators are designed for culinary enthusiasts, offering both unparalleled performance and sophisticated design.

The Sub-Zero 427RG and 427G are part of the brand's 400 series, known for their dual refrigeration systems. This technology utilizes separate cooling systems for the refrigerator and freezer compartments, which helps maintain optimal humidity levels and prevents the transfer of odors. The models feature advanced air purification systems that continuously filter and circulate air, ensuring that food stays fresher for longer. Additionally, the 427RG model comes with a glass door option, providing visibility to its premium contents while adding a stunning aesthetic to any kitchen.

In terms of storage, both 427RG and 427G models offer ample capacity with adjustable shelves and customizable bin configurations. The shelving is crafted from elegant glass, which adds a touch of sophistication. With features such as a niche drawer for fresh produce, users can easily organize their groceries while maximizing space efficiency.

The Sub-Zero 424FSG and 424G models are similarly impressive, though they come with their own set of unique features. The 424FSG, for instance, includes a full-width freezer drawer, equipped with an ice maker and ample storage space, making it ideal for those who require extra freezing capacity. The 424G, on the other hand, seamlessly integrates a clean, modern design with robust functionality. Both models benefit from an intuitive touch control system that allows for precise temperature adjustments, alongside soft-close drawers that enhance user convenience and reduce wear.

Energy efficiency is another hallmark of Sub-Zero’s design philosophy. All four models are ENERGY STAR rated, combining performance with environmentally conscious technology. This commitment to quality and sustainability extends to their use of durable materials and craftsmanship, ensuring longevity and reliability for years to come.

Whether you choose the sleek sophistication of the 427RG and 427G or the functional elegance of the 424FSG and 424G, Sub-Zero offers a refrigeration solution that balances innovation with traditional craftsmanship. These refrigerators are not just appliances; they are an investment in kitchen sophistication and food preservation excellence. With their state-of-the-art features, these models exemplify how Sub-Zero remains at the forefront of luxury refrigeration.