Command pads
The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press START/ENTER for an oven function.
Using the control lock
The control lock prevents unwanted use of the oven by disabling most of the control panel command pads (except CLOCK and TIMER SET/OFF).
NOTES:
•Control lock is only available when oven is not in use or control has not been set.
•Set control lock when cleaning the control panel to prevent oven from accidentally turning on.
USING YOUR RANGE
To lock or deactivate the control panel:
Press and hold START/ENTER for 5 seconds. A single tone will sound
START and “Loc” and will appear on the
ENTER | temperature display. When the |
| |
5 SEC | control is locked, “START?” will |
| |
appear on the display if you press any | |
command pad. |
To unlock the control panel: Press and hold START/ENTER for 5
seconds. A single tone will sound START and “Loc” and will disappear from
ENTER | the temperature display. |
5 SEC |
|
Starting a function
After programming a function, you must press START/ENTER to start the
START function. If you do not press
ENTER | START/ENTER within 5 seconds |
of programming, “START?” will show on the display as a reminder. The control will return to time of day mode after 5 minutes if START/ENTER is not pressed.
Canceling a function
OFF/CANCEL will cancel any function except for the Clock and Timer Set
OFF functions. When you press CANCEL OFF/CANCEL, the display will
show the time of day or, if Minute Timer is also being used, the time remain- ing. To cancel the Minute Timer, see “Using the electronic Minute Timer” section.
NOTE: You may hear a fan blowing in
the oven even after you press OFF/CANCEL. This is the cooling fan. It will turn off when the oven cools down.
15