Whirlpool SF395LEE manual Example for 41⁄2-hour cycle, Example for 230 start time

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (CONT.)

To delay the start using delay start time:

1.Press the auto clean pad.

This will automatically set a 31⁄2-hour Self-Clean- ing cycle.

NOTE: There will be a 30-minute cool-down 1⁄2 hour before the cycle is over.

PRESS YOU SEE

AUTO

CLEAN

CLEAN TIME

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the Hour and Minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN

TIME

(example for 41⁄2-hour cycle)

3. Press the delay start time pad. PRESS YOU SEE

DELAY

START

TIME

CLEAN

STARTTIME

4.Set the start time.

Press the “up” (s) or “down” (t) pad(s) until the correct time shows on the display. The oven will automatically come up with the stop time by adding the set cleaning time to the set start time.

PRESS YOU SEE

HR MIN

CLEAN

STARTTIME

(example for 2:30 start time)

5. Press the start/enter pad.	PRESS	YOU SEE
	START
	ENTER		ON
	5 SEC	DELAY		CLEAN

6.After the Self-Cleaning cycle starts:

The door will lock as soon as you press the start/ enter pad.

YOU SEE

HEATON TIMED

LOCKED CLEAN TIME

7. After the Self-Cleaning cycle ends:	YOU SEE
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.

CLEAN

continued on next page 29