USING YOUR RANGE
TONES
Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all tones except the
Press and hold the stop time pad for 5 seconds. A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see “oFF” for 3 seconds when the tones are turned off and “on” for 3 seconds when they are turned on.
To choose between high and low volume tones:
Press and hold the delay start time pad for 5 seconds. A short tone will sound to tell you the tones have been changed. Either “HI” or “LO” will appear on the time display for 3 seconds to show the volume you chose.
BAKING/ROASTING
Your oven is designed with the AccuBake tempera- ture management system to constantly monitor oven temperature. The burner element will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.
IMPORTANT: Do not try to light the oven burner during a power failure.
1.Place the racks where you need them in the oven. For more information, see “Positioning racks
Front | and pans” earlier in this | |
section. | ||
|
Rear
2. Choose the bake setting (optional). | PRESS | YOU SEE |
F
BAKE
3.Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press the ▲ temp pad to raise the temperature or the ▼ temp pad to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
YOU SEE
F
BAKE
(example for bake at 375°F)
14