Whirlpool YGR556 manual Bake, Broil, To Program the First Step of the Sequence

Page 12

All steps of a sequenced program must be programmed with a stop time. If a stop time is not entered for a step within the sequence program, and the FIRST STEP/NEXT STEP pad is pressed, three tones will sound indicating an invalid key press.

To Program the First Step of the Sequence:

1.Press FIRST STEP/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that step 1 is being programmed.

2.Choose the desired cook function. For example, press COOL.

3.Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to begin.

If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to stop.

The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display.

NOTE: When programming a COOL function as part of a sequence, COOL must be programmed as the first step.

To Program Next Steps of the Sequence:

1.Press FIRST STEP/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. The number of the step being programmed will flash. “START” and “TIME will appear on the display.

2.Choose the desired cook function. For example, press BAKE.

3.Press TEMP “up” or “down” arrow pad (if desired) to select temperature.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select stop time.

5.Press START to begin sequence once all steps haven been programmed.

6.Press STOP CANCEL at any time to clear program and to stop program.

Continue to repeat the steps above until up to all four cook functions are programmed.

To Review/Modify Programmed Sequence:

If program steps are partially or completely programmed, and the sequence has not been started, the programmed cook functions can be reviewed.

1.Press REVIEW STEPS. Step 1 will appear in the display

Each subsequent press of REVIEW STEPS will cause display of programmed steps in order. “STEP” and “RECALL” will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5 minutes if no further action is taken.

2.If fewer than four steps have been programmed, press REVIEW STEPS repeatedly until the last programmed step is displayed, then press FIRST STEP/NEXT STEP if it is desired to program an additional step.

While a step is recalled, a cook function pad can be used to change the function, or the TEMPERATURE “up” or “down” arrow pad can be used to change the set temperature.

START TIME, when used with the HR or MIN “up” or “down” arrow pads, can be used to change, add or delete a delayed start.

STOP TIME can be used to change the stop time. Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook functions.

To Modify Sequence Programming:

1.Press UNDO. The last step of the sequence will be canceled.

If the programmed sequence has not been started, see “To Program Next Steps of the Sequence” section to program a step to replace the canceled cook function.

2.Press START. The first step will show on the display and the program sequence will begin.

Changes can be made to the STOP TIME during a programmed cook function. However, changes cannot be made after a programmed cook function has been completed.

If at any time during an active sequenced program

FIRST STEP/NEXT STEP is pressed, three tones will sound.

Bake

ACCUBAKE® DUO SYSTEM™ Temperature Management

The ACCUBAKE DUO SYSTEM electronically regulates the oven heat levels during preheat and bake to maintain the most uniform temperature control by utilizing 2 temperature sensors to independently control the bake and broil elements for optimal cooking results.

The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on, the broil element will not. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to the

“Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat conditioning time to end before putting food in unless recommended in the recipe.

To Bake or Roast:

1.Press BAKE.

2.Press TEMP “up” or “down” arrow pad to set a temperature other than 350°F (175°C) in 5° amounts. The bake range can be set between 170°F and 500°F (75°C and 260°C).

3.Press START. The temperature can be changed after this step. START does not need to be pressed again.

4.Press STOP CANCEL when finished.

Preheating

After START is pressed, the oven will enter a timed preheat conditioning. “PrE” and the time countdown will appear on the display. When the preheat conditioning time ends, a tone will sound and the selected temperature will appear on the display.

Preheat temperatures are affected by varying factors such as room temperature and peak energy usage times. It is normal for the temperature showing on the display and the actual oven temperature to differ.

Waiting an additional 10 minutes after the preheat conditioning time ends to put food in the oven is suggested when baking foods with leavening ingredients, such as yeast, baking powder, baking soda and eggs.

Broil

Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broiling temperatures.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Polara Electric Refrigerated Range Use & Care Guide9755084 Table of Contents Range SafetyAnti-Tip Bracket Important Safety Instructions Parts and Features For self-cleaning rangesFor units with ventilating hood Control PanelAccusimmer Feature Cooktop USECooktop Controls Dual Cooking ZoneHot Surface Indicator Light under ceramic glass Cookware CharacteristicsHome Canning CookwareElectronic Oven Control Oven USE Positioning Racks and Bakeware BakewareMeat Thermometer Oven Vent with Removable DeflectorTo Set a Delayed or Timed Cool Function Oven Door VentCool Function Sequence ProgrammingAccubake DUO System Temperature Management BakeBroil To Program the First Step of the SequenceBroiling Chart Convection CookingConvection Baking To BroilWarm Hold Feature Convection Roasting ChartTo Use Automatic Warm/Cool Self-Cleaning Cycle Range CareTimed Cooking General Cleaning Exterior Porcelain Enamel SurfacesCeramic Glass Oven Light Oven DoorTroubleshooting To ReplaceU.S.A CanadaFull TWO-YEAR Warranty Whirlpool Corporation will not pay forPlease call 9755084Guide d’utilisation Et d’entretien 9755084FCommandes DE Four Électroniques Dépannage Assistance OU Service GarantieSécurité DE LA Cuisinière Utilisation DU FourSécurité DE LA Cuisinière La bride antibasculementConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Tableau de commande Pièces ET CaractéristiquesCuisinière Commandesde la table de cuisson DE CuissonCaractéristique Accusimmer Zone de cuissonà double fonctionVitrocéramique Préparation de conserves à lamaisonTémoin lumineux de surface chaude sous vitrocéramique Ustensiles de cuisson Ustensile CaractéristiquesCommandes DE Four Électroniques AffichageMiseen marche Arrêt annulationVerrouillage des commandes Signaux sonoresFahrenheitetCelsius MinuterieCommande de latempérature du four Papier d’aluminiumPositionnement des grilles et desustensiles De cuisson GrillesUtilisation DU Four Réfrigéré Thermomètre à viandeÉvent du four avecdéflecteuramovible Évent de la porte du fourAliments Recommandations Fonction refroidissementCoolProgrammation de séquences Réglage dune fonction refroidissement minuté ou différéCuisson au four Cuisson au gril Cuisson au four ou rôtissagePréchauffage Cuisson au grilCuisson par convection Cuisson au fourpar convectionCuisson au four par convection Tableau DE RÔ Tissage PAR ConvectionUtilisation du mode garde au chaud seulement Cuisson minutéeEntretien DE LA Cuisinière Programme d’autonettoyageRéglage dune durée de cuisson Réglage dune durée de cuisson différéeNettoyage général Surfaces Externes EN Émail VitrifiéCommandes DE LA Table DE Cuisson Tableau DE CommandeVitrocéramique Extérieur DE LA Porte DU FourDépannage Lampe du fourPorte du four La température du four est trop élevée ou trop basse Les témoins lumineux du four clignotentLaffichage indique des messages Le programme d’autonettoyge ne fonctionne pas9755084F Garantie Complète DE Deux ANSWhirlpool Corporation ne paiera pas pour

YGR556, GR556 specifications

The Whirlpool GR556 and YGR556 series represent an impressive stride in kitchen appliance innovation, combining functionality with modern aesthetics to enhance cooking experiences. Both models are designed for efficiency and practicality, making them suitable for various home cooks, from amateurs to seasoned chefs.

One of the standout features of the Whirlpool GR556 and YGR556 is the even-heating technology. This unique system ensures that heat is distributed evenly across the cooking surface, significantly reducing hot spots that can lead to uneven cooking. As a result, meals can be prepared with greater consistency, whether roasting a turkey or baking a delicate soufflé.

Another notable characteristic of these ranges is their user-friendly control panel. The intuitive interface allows for precise temperature adjustments and cooking mode selections, simplifying the cooking process. It also includes digital displays that provide real-time information on cooking times and temperatures, ensuring users can stay informed throughout the cooking process.

The self-cleaning option is yet another highlight of these models. This convenient feature eliminates the hassle of manual cleaning by using high heats to burn off spills and food residue. This not only saves time but also helps maintain the appliance's appearance and performance over the long term.

Safety features are also at the forefront of the GR556 and YGR556 designs. Both models come equipped with a control lock that prevents accidental adjustments, making them ideal for households with children. Additionally, the oven features a built-in temperature sensor that automatically shuts off the appliance if it overheats, providing peace of mind for users.

With robust construction and sleek finishes, both the GR556 and YGR556 are designed to complement any kitchen decor. The ranges are available in various colors, allowing homeowners to choose a finish that suits their style. Furthermore, the spacious oven capacity accommodates large dishes, providing the flexibility needed for family gatherings and special occasions.

Incorporating energy-efficient technologies, these Whirlpool models are designed to minimize energy consumption while delivering powerful performance. Consequently, they not only help reduce utility bills but also contribute to a more eco-friendly kitchen environment.

In summary, the Whirlpool GR556 and YGR556 series deliver an exceptional combination of features, including even-heating technology, user-friendly controls, self-cleaning capabilities, and advanced safety measures. These models are a testament to Whirlpool's commitment to innovation and quality, making them an excellent choice for anyone looking to elevate their cooking experience.
Top Page Image Contents