Gaggenau BX 480/481 610 manual Setting the Yom Tov mode

Page 23

Yom Tov mode

With this function, the appliance is programmed to perform in three stages.

Stage 1 and 2 can be programmed for a maximum total duration of 74 hours. The duration of Step 3 is 1 hour and cannot be modified.

Stage 1: maintains a warm temperature of 122° F (50°C) in the convection heating function. The interior oven lights remain off through this stage.

Stage 2: the appliance raises to a desired temperature setting and maintains a temperature between 120 and 450° F (50 -230°C). For warming and cooking foods in the convection heating function. The desired time can be adjusted for this stage. The interior oven lights will be on during this time.

Stage 3: maintains a warm temperature of 122° F (50°C) in the convection heating function for 1 hour after stage 2 has ended. The interior oven lights will be on during this time.

Note that easily perishable foodstuffs must not be left in the oven for too long.

Setting the Yom Tov mode

1Set the program selector to ž . To set the Yom

Tov mode for both ovens, set both program selectors to ž .

2Touch the / symbol.

The suggested value of 24h at 185° F (85°C) appears in the display.

To set Stage 2 temperature:

1Rotate selector to desired Stage 2 temperature.

2Start with I .

The temperatures of Stage 1 and Stage 2 appear in the display. The remaining time to the beginning of Stage 2 is counted down in the display. The Yom Tov screen will appear as shown.

Æ

 )

  )

The program will begin with the pre-set warm temperature without light, then advance to the programmed temperature with light until the end of the set date and time, and then maintain the pre-set warm temperature for 60 minutes.

The appliance no longer heats after expiry of the time. The display is blank. Set the program selector to 0.

Switching off:

To cancel the operation, set the program selector to 0.

 )

6DEEDWKPRGH

To set Stage 2 cooking time with rotary selector:

1Touch the $ symbol to adjust the duration of Stage 2 cooking time 6 .

2Set the desired Stage 2 cooking time with the rotary selector.

3Touch the C symbol to adjust the end of Stage 2 cooking time 5 .

4Select the end time with the rotary selector.

5Change the date if needed by touching the C symbol to V .

6Rotate the selector to the desired date.

7Confirm settings by touching the ™ symbol.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents BX 480/481 Table of Contents Customer service Tables and tips Safety DefinitionsProper Installation and Maintenance Important Safety InstructionsFire Safety Burn Prevention Child SafetyRisk of electric shock Cleaning SafetyCookware Safety State of California Proposition 65 WarningsTips for saving energy Causes of damage Protecting the environmentOven Getting to know the applianceDisplays and controls SymbolsSymbol Function Colors Colors and displayAdditional information Cooling fanPosition Temperature ApplicationProgram selection positions Position Function/type of heating Temperature Application Special accessories AccessoriesSetting the date format Setting the time formatSetting the time Setting the languageCompleting initial set-up Setting the dateSetting the temperature format Cleaning accessoriesOperating the appliance Oven interior Inserting accessoriesActivating the appliance Standby Activate applianceQuick heat Setting the heating mode and the temperatureSafety lock Switching offStopwatch Timer functionsLaunching the timer menu TimerCooking time Change end of cooking time Delay end of cooking timeEnd of cooking time Set time functions for both ovens simultaneouslyFollow these steps Sabbath mode and Yom Tov modeSetting the Sabbath mode Setting the Yom Tov mode Yom Tov modeRisk of burns Core temperature probeInsert the core temperature probe in the food to be cooked Setting the core temperatureCore temperature guidelines Preparation Rotisserie spitTurn on rotisserie spit Switching off the rotisserie spitRequirement Roasting function Child lockActivating the child lock Deactivating the child lockBasic setting Possible settings Explanation Factory settingDate format Setting the date format Current date Cleaning agents Cleaning and maintenanceRemoving the plug-in grid Self-clean pyrolysisCleaning accessories with self-clean pyrolysis Preparing self-clean pyrolysisStarting self-clean pyrolysis Disruption Possible cause Solution TroubleshootingPower cut Demo modeReplacing the oven lamp Customer serviceBaking table Tables and tipsBaking tips and tricks What to do if Roasting table Roasting tips and tricks Cooking au gratin Grilling tableDishes Shelf level Total cookingHealth risk Mum when preparing foodThawing Acrylamide in foodstuffsPage Gaggenau Gaggenau Hausgeräte GmbH
Top Page Image Contents