Example, Printing OUT Stored Data PUSH-BUTTON, On/Off

6.5DISPLAYING THE THREE LATEST HACCP ALARMS (PUSH-BUTTON 10)

Set the machine to ON .

Press and hold down push-button 10 for more

HACCP

than five seconds (relative LED illuminates) to enter the alarm display function (date, hour and minute, alarm type and maximum temperature detected).

Every time the HACCP push-button is pressed, the

stored data are displayed.
EXAMPLE:
ALL.11	Display 15	Display 16
	---	Str (start)
	12	hr hour
	29	min minutes
	6	day days
	8	mon month
	03	yr year
	End	end
	13	Hr
	21	min
	6	day
	8	mon
	03	yr
	75	maximum temperature
		detected inside the cell

6.6 PRINTING OUT STORED DATA PUSH-BUTTON (10)

With the appliance in STAND-BY status, press and

hold down push-button 10 for more than five seconds to print out the latest work cycle.

(With the appliance in STAND-BY status, press push-

button 10 once to print out HACCP data). When the appliance is operating and the printer is on, the current cycle will be printed out.

6.7 FORCED VENTILATION FUNCTION

To activate this function when the appliance is

ON , press push-button 12 for more than five seconds. The fan will continue to operate even when the cell door is open.

During forced ventilation, display 16 will show“dEF”.

6.8 MANUAL DEFROSTING

To activate this function when the appliance is

ON press push-button 12 (relative LED illuminates).

If conditions allow it (the temperature detected by the evaporator probe must be lower than the set point in the program parameters), the appliance

will perform a defrost cycle. Display 16 will show “dEF”.

To immediately stop a defrost cycle, press push- button 12 .

6.9 AUTOMATIC DEFROST CYCLES

The appliance automatically performs defrost cycles during storage. Three defrost cycles are performed during a 24-hour period(once every 8 hours).

The appliance automatically restarts once the defrost cycle has been completed.

6.10 PRINTER OPERATION

If you have to turn the instrument ON/OFF press

ON/OFF

If you have to feed the paper by hand press feed If you have to change the roll of paper, turn the instruments off, press the push bottom for opening the panel at the front of the instrument.

Slip the roll of paper into the lower side of the roller press feed as long as the roller drags the roll of paper.

Put the roll of paper into it’s box

Close the panel at the front of instruments.

EXAMPLE: