ELECTRONIC CLOCK & AUTOMATIC OVEN TIMER OPERATION
SETTING THE TIME OF DAY
A
U
T
O
Minute Cook End
Minder Period Time Manual
Minute Cook End
Minder Period Time Manual
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is turned on.
Step 3 When switched on the display will show 0.00 and Auto symbol will be flashing intermittently.
Step 4 Press & hold in both the “Minute Minder” & “Cook Period” button together.
Step 5 With the “Minute Minder” & “Cook Period” buttons still held in, press either the “+” or
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme.
Bell Symbol
Minute Cook End
Minder Period Time Manual
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day is set correctly.
Step 2 Press and hold the Minute Minder Button, a 
symbol will light up.
Step 3 With the “Minute Minder” button held in, set the required Minute Minder time using the “+” and
Release all buttons and the timer display will revert back to the time of day. Bell symbol will remain lit to signify that a Minute Minder period has been set.
At the end of the set time a bleeping sound will be heard, and the 
symbol will flash for approximately 2 minutes.
After approximately 2 minutes the bleeping sound will stop and the 
symbol will go out automatically.
Minute Cook End
Minder Period Time Manual
Step 4 To cancel the bleeping sound within the two minutes press the
Minute Minder button.
Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the Minute Minder button and then at the same time pressing the
11