Dacor IF36RNBOL, IF36LNBOL, EF36RNBSS manual Door Panels and Cabinet Clearance IF36 Series Models

Installation Requirements

Door Panels and Cabinet Clearance - IF36 Series Models

The custom door panels and adjacent cabinets for models series IF36 must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see Door Swing 90° on the following page.

Door Swing 110°

Actual Size

Refrigerator to

Cabinet Clearance

110˚ Door

Stop Position

NOTE: For IF36 series models, rout the hinge side of the custom door panels to a radius that is equal to at least half the thickness of the panel if a 130° door swing is desired. See Adjust Doors.

	Refrigerator
	Side Trim
	11/2"
	(3.8 cm)
	11/4"
	(3.2 cm)
	1"
	(2.5 cm)
	Cabinetry
Hinge	1/4" (6.35 mm)
	1/2" (1.3 cm)
	3/4" (1.9 cm)
	1" (2.5 cm)

1/2"

	(1.3 cm)
			3/4"
			(1.9 cm)
			a	1"
	c			(2.5 cm)
		Overl
	Ba			11/4"
	P
			P	(3.2 cm)
	ker		y		11/2"
Door
			anel		(3.8 cm)
	anel

Spacer Panel

When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinet to some degree.

7