Whirlpool WWC359BLS manual Reverse Door Swing optional, Final Steps, Top Hinge, Bottom Hinge

	Reverse Door Swing (optional)	WARNING
1.	Remove the upper hinge pin from the right side of the cabinet
	and reinstall it on the left side. See Graphic 2.
2.	Remove the plastic cap from the top left side of the door
	frame and reinstall it on the top right side of the door frame, in
	the previous pin location. See Graphic 1.
3.	Reposition the door on the cabinet and push up until the top
		Electrical Shock Hazard
	hinge pin is inserterted into the top of the door.
4.	Remove the bottom left leveling leg and transfer it to the right	Plug into a grounded 3 prong outlet.
	side. See Graphic 5.	Do not remove ground prong.
5.	Remove the two retaining screws on the bottom left side of
		Do not use an adapter.
	the cabinet and reinstall them on the right side in the former
	lower hinge assembly screw positions. See Graphic 6.	Do not use an extension cord.
6.	With the door closed, reinstall the lower hinge assembly on
		Failure to follow these instructions can result in death,
	the left side of the wine cellar. See Graphic 3.
7.	Reinstall leveling leg. See Graphic 4.	fire, or electrical shock.

	3. Plug in wine cellar or reconnect power.
Final Steps

1.Stand the wine cellar upright and verify the door aligment and proper seal against the cabinet.

2.Let stand upright for 60 minutes.

Top Hinge 2

1

A A

A. Plastic Cap

				A. Top Hinge Pin
6
				Bottom Hinge	3
				A
A				B
B
C
A. Screw Washers
B. Spacers				C
C. Retaining Screws				D
5	Leveling Leg		Leveling Leg	E
		4		A. Hinge Washer
		for Bottom Hinge		B. Bottom Hinge Pin
				C. Screw Washers
				D. Spacers
				E. Hinge Screws

5