REFRIGERATOR USE
Ensuring Proper Air Circulation
In order to ensure proper temperature, you need to permit proper airflow in the refrigerator. Do not cover the shelves with towels or plastic. If the shelves are covered, temperature and moisture problems may occur.
IMPORTANT: To prevent odors and keep food from drying out, wrap or cover foods tightly.
Adjusting the refrigerator control
Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before putting food into the refrigerator. The control is set correctly when milk or juice is as cold as you like. Move the dial one setting at a time and wait 24 hours between adjustments.
IMPORTANT: If you add food before the refrigerator has cooled completely, your food may spoil. Turning the control to a colder (higher) than recommended setting will not cool the compartment any faster.
Additional refrigerator control
Your refrigerator has an additional refrigerator control located on the inside on the convertible compartment. This additional control is for use if the room air temperature falls to 48°F (16°C). To keep the refrigerator compartment from becoming too cold, slide the additional refrigerator control to COLD.
When the room air temperature is above 48°F (16°C), slide the additional refrigeration control to COLDER for best results.
Using the Control
Setting the refrigerator control
The refrigerator control is located on the outside of the refrigerator at the top. For your convenience, your refrigerator control is preset at the factory. When you first install your refrigerator, make sure that the control is still preset to the mid- setting as shown.
NOTE: To turn your refrigerator off, turn the refrigerator control to OFF. Your product will not cool when the refrigerator control is set to the off position.
REFRIGERATOR
FEATURES
Refrigerator Shelves
Store similar foods together and adjust the shelves to fit different heights. This reduces the time the refrigerator door is open and saves energy.
To remove and replace a shelf:
1.Remove the shelf by pulling it forward.
2.Replace the shelf by sliding it back into place.
6