Using the CLOCK/programmer-elec(if fitted)
you are asked to enter in an end time, or | Setting the minute minder |
when you would like the oven to switch |
|
itself off. |
|
To set the time of day |
|
•Press the Up and Down buttons together for a few seconds, and release.
•The ‘•’ in between the numbers on the LED Display will begin to flash.
•While the ‘•’ is flashing it is possible to adjust the time using the Up and Down buttons. Once the time has been set, allow approximately 30 seconds before using any of the other timer functions. This ensures that the time will remain correct.
To select an alarm tone
There are three tones to choose from.
•Press and hold the down button to listen to the first tone.
•Release the down button and press it again to listen to the second tone etc.
•Releasing the down button after the tone has sounded will automatically select that tone.
•To set the Minute Minder, press the Function button once. The bell sym- bol will appear and start flashing. The flashing only lasts for 5 seconds so the time must be set within this time frame.
•Use the Up and Down button to set the length of time required. Once this has been done, the Minute Minder is set.
•When the desired length of time has counted down the alarm will sound.
•To cancel the tone, press any of the buttons.
•To cancel the Minute Minder at any time, press the Up and Down buttons together.