Using the CLOCK/programmer-elec(if fitted)
Fully automatic cooking (ex- ample)
This programming method is best suited for when a delayed start time is required. Unlike the semi automatic methods this requires both the duration and the end time to be entered. The timer will work out the start time and begin cooking.
•Press the function button twice to select the length of time your food will need. (7)
•The ‘A’ on the left hand side will flash and the ‘dur’ message will flash up.
(8)
•Using the Up and Down buttons set the time you require within 5 seconds of the ‘dur’ message. (9)
•Press the function button three times until the ‘A’ flashes again and the
‘End’ messages appears. (10) & (11)
•Using the Up and Down buttons, set the time you would like the oven to switch off. (12)
•Set the temperature of the oven and place the food inside.
While the automatic function is running, the ‘A’ will appear statically on the display, with the time.
Try to keep the end time as close to when you expect to return, this will prevent cooked food from being left standing in a warm oven.
The timer will calculate the appropriate start time.
To switch off the alarm, press any button.