Whirlpool GI15NDXZB, GI15NDXZQ, GI15NDXZS Leveling, Water Filtration System, Reverse Door Catch

Page 11

Reverse Door Catch

1.Remove the white decorative screws from the opposite side of the door and set aside.

2.Remove the screws from the magnetic door catch and replace it on the opposite side of the door.

3.Install the white decorative screws on the opposite side of the door.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

Leveling

1.Move the ice maker to its final location.

NOTE: If this is a built-in installation, move the ice maker as close as possible to the final location.

2.Place the level on top of the product to see whether the ice maker is level from front to back and side to side.

3.Push up on the top front of the ice maker, and then locate the leveling screws that are on the bottom front of the ice maker.

4.Using an adjustable wrench, change the height of the legs as follows:

■Turn the leveling leg to the right to lower that side of the ice maker.

■Turn the leveling leg to the left to raise that side of the ice maker.

NOTE: The ice maker should not wobble. Use shims to add stability when needed.

5.Push up on the top rear of the ice maker and locate the leveling legs that are on the bottom rear of the ice maker.

6.Follow the instructions in Step 4 to change the height of the legs.

7.Use the level to recheck the ice maker to see that it is even from front to back and side to side. If the ice maker is not level, repeat steps 2 to 5. If the ice maker is level, go to the “Connect Water Supply” section.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Install the Water Filter

1.Locate the accessory packet in the ice maker and remove the water filter.

2.Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed.

It is important for the ice maker to be level in order to work properly. Depending upon where you install the ice maker, you may need to make several adjustments to level it. You may also use the leveling legs to lower the height of the ice maker for undercounter installations.

Tools Needed

Gather the required tools and parts before starting installation.

■9" level

■Adjustable wrench

NOTE: It is easier to adjust the leveling legs if you have another person to assist you.

A

B D C

A. Cover

C. Alignment pin

B. O-rings

D. Alignment arrow

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents W10518926B ICE MakerTable DES Matières Table of ContentsÍndice Unpack the Ice Maker ICE Maker SafetyInstallation Instructions Cleaning Before UseRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsTools Needed Rear View Connecting the Water LineVacation or Extended Time Without Use Connect Water SupplyDrain Cap Ice Maker Drain Pump InstallationIf Ice Maker Is Currently Installed Kit ContainsDrain Tube Drain Pump InstallationDrain Pump Installed Rear PanelGravity Drain System Drain ConnectionVent Tube Drain Pump System on some models Connecting the DrainIce Maker Door Reversal Side Swing Only Side ViewReplace Door Wrap on some models Door Stop and End-Cap ReversalReverse Hinges Replace DoorReverse Door Catch Install the Water FilterLeveling Water Filtration SystemReplace the Water Filter ICE Maker USEHow Your Ice Maker Works Water Filter Status LightDoor Ajar Alarm Using the ControlsFast Ice Mode CleanIce Maker System CleaningICE Maker Care Exterior SurfacesInterior Components To Shut Down the Ice Maker For Ice Makers with a Drain Pump InstalledVacation and Moving Care Ice Maker Seems Noisy TroubleshootingIce Maker Operation Ice Maker Will Not OperateIce Maker Runs But Produces No Ice Ice ProductionIce Quality Our consultants provide assistance with If you need replacement partsU.S.A CanadaAccessories Performance Data SheetThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantySu seguridad y la seguridad de los demás es muy importante Seguridad DE LA Fábrica DE HieloRequisitos eléctricos Instrucciones DE InstalaciónDesempaque la fábrica de hielo Requisitos de ubicaciónConexión del suministro de agua Requisitos del suministro de aguaVacaciones o tiempo prolongado Sin uso El juego contiene Instalación de la bomba de desagüe de La fábrica de hieloVista posterior Instalación de la bomba de desagüe Si la fábrica de hielo ya está instaladaTapa de desagüe Línea de suministro de aguaBomba de desagüe instalada Tubo de desagüeRanura de la lengüeta de montaje de la bomba de desagüe Ubicaciones de las piezasVista lateral Conexión del desagüeTubo de ventilación Sistema de desagüe por gravedadConexión del desagüe Sistema de la bomba de desagüe en algunos modelosBisagra superior Inversión de las bisagrasCómo volver a colocar la puerta Cómo invertir el seguro de la puerta NivelaciónBisagra inferior Instalación del filtro de agua Sistema de filtración de aguaUso de los controles USO DE LA Fábrica DE HieloCómo funciona su fábrica de hielo Limpieza Cuidado DE LA Fábrica DE HieloSonidos normales Bandeja de agua Tapón de desagüe Condensador Un condensador sucio u obstruidoTornillo Espaciador de plástico Rejilla de corte Componentes interioresPara apagar la fábrica de hielo Cuidado durante las vacaciones y mudanzasLa fábrica de hielo no funciona Solución DE ProblemasFuncionamiento de la fábrica de hielo La fábrica de hielo funciona pero no produce hielo Producción de hieloCalidad del hielo En los EE.UU Problemas de plomeríaAyuda O Servicio Técnico Limpiador Hoja DE Datos DEL RendimientoAccesorios Filtro de aguaEsta garantía limitada no cubre Garantía LimitadaVotre sécurité et celle des autres est très importante Sécurité DE LA Machine À GlaçonsEnlèvement des matériaux d’emballage Instructions D’INSTALLATIONExigences d’emplacement Déballage de la machine à glaçonsRaccordement à la canalisation d’eau Spécifications électriquesSpécifications de l’alimentation en eau Vacances ou longue période ’inutilisationVue arrière Outillage nécessaireRaccordement du tuyau d’eau Bouchon de vidange Si la machine à glaçons est installéeInstallation de la pompe de vidange Contenu de l’ensemblePosition des pièces Panneau arrièreTube de vidange Encoche de patte de montage de la pompe de vidangeTube de ventilation Pompe de vidange installéeSystème avec pompe de vidange sur certains modèles Raccordement de vidangeVidange par gravité Vue latéraleClé de ¹⁄₄ Tournevis Phillips Charnière inférieure Réinstallation de la porteRéinstallation du revêtement de porte sur certains modèles Inversion du sens de montage des charnièresSystème de filtration d’eau Installer le filtre à eauNivellement Témoin lumineux de l’état du filtre à eau Remplacement du filtre à eauUtilisation DE LA Machine À Glaçons Fonctionnement de la machine à glaçonsBruits normaux Utilisation des commandesMode Fast Ice glaçons rapides Alarme de porte entrouverteSystème de la machine à glaçons Entretien DE LA Machine À GlaçonsNettoyage Surfaces extérieuresComposants intérieurs Machine à glaçons avec pompe de vidange Précautions à prendre avant les vacances ou un déménagementArrêt de la machine à glaçons La machine à glaçons ne fonctionne pas DépannageQualité des glaçons Production de glaçonsSi vous avez besoin de pièces de rechange Assistance OU ServiceProblèmes de plomberie Aux États-UnisAu Canada AccessoiresSystème de filtration d’eau de la machine à glaçons Feuille DE Données SUR LA PerformanceW10518926B Garantie DES Gros Appareils Ménagers Whirlpool CorporationLa présente garantie limitée ne couvre pas

GI15NDXZS, GI15NDXZQ, GI15NDXZB specifications

The Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS are versatile and stylish ice makers designed to enhance any kitchen or home bar area. These models stand out for their sleek design, compact size, and user-friendly features, making them ideal for those looking to enjoy the luxury of freshly-made ice at home.

One of the main features of these models is their production capacity. Each unit can produce up to 35 pounds of ice per day, ensuring that you never run out, whether you're hosting a party or enjoying a quiet evening at home. The ice maker uses a state-of-the-art compressor cooling system which not only supports efficient production but also helps maintain consistent ice quality. The bin capacity is also impressive, accommodating up to 28 pounds of ice, meaning less frequent refills and more convenience for users.

In terms of design, these models boast a modern stainless steel exterior, with finishes available in bold black, classic white, and sleek stainless steel. This variety allows for easy integration into any kitchen decor or style. The reversible door feature adds flexibility in placement, making it easy to fit the unit in different spaces.

The Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS also integrate innovative technologies that enhance functionality. One such technology is the advanced filtration system that improves water quality, ensuring that the ice produced is crystal clear and tastes great. The units are designed with a quiet operation feature, making them suitable for any environment, including open-concept spaces or entertainment areas.

Moreover, these models include an automatic shutoff feature that activates when the ice bin is full, preventing overflow and minimizing waste. They also have a simple control panel that allows users to easily turn the machine on and off, as well as monitor the ice production status.

Maintenance is straightforward, with a removable ice bin that simplifies cleaning and filling. The interior surfaces are designed for easy wipe-down, helping to maintain hygiene with minimal effort.

In summary, the Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS ice makers combine efficiency, style, and convenience. With their robust ice production capabilities, modern aesthetics, and user-friendly features, these units make a valuable addition to any home, enabling users to enjoy cold drinks and ice in a hassle-free manner.
Top Page Image Contents